Align T-REX 700E DFC Super Combo

Guideline(3GX Programmable Flybarless System):
Brand new redesigned 3GX represents a brand-new generation of multi function flybarless system. The significantly improved performance will develop immediate effect on any lovers.
3GX is currently the tiniest and lightest flybarless system on the market. Two ports to directly link Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a basic procedure. In addition, the 3GX can support all the CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical showed instruction on the computer setup software directs the user through an action by step setup procedure, allowing for fast setups without omitting any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection set, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to reduce electronic wire clutters.
Custom specifications have actually been opened up in 3GX to permit pilots to fine tune numerous settings for swashplate and rudder. Settings export feature enables customized settings to be shared amongst pals.
3GX makes use of brand name new gyroscope sensors of the highest specs when compared with other flybarless systems currently on the market, allowing it to be utilized under extreme conditions. Dual axis plus rudder sensor significantly improves swashplate and rudder correction accuracy compared with last generation 3G. This is clearly obvious in stable hover in addition to extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The remarkable vibration resistant quality is evident even when mounted with harder double sided mounting tape.
3GX makes use of 16 bit processor which is 4 times faster than previous generation, together with a completely re-written firmware. The result is a significant stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns type of maneuvers are easily accomplished with accuracy.
3GX's rudder enables constant rudder feel even under high speed conditions. This exceptional control feel will permit pilot of all ability levels to experience the ideal combination between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position in addition to altitude, and even self-governing way point flights in addition to return home.

Specification(T-REX 700E V2):
1. Geared up with the low CG DFC rotor head, efficiently reduce wind resistance during flight, providing the most direct and accurate control feel back to the pilot, and displays thrilling 3D performance and unthinkable flight speed.
2. Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, enabling faster and more accurate control response.
3. Integrated servo mounts on the main shaft bearing blocks, allowing cyclic servos to be mounted directly onto the bearing blocks, which together with the composite material frame plates, creating a tidy and uncluttered look.
4. Utilizes composite carbon material combination method on frame structure for ease of upkeep and high rigidity. Increased front opening area to enable easier battery setup.
5. Ingenious moving battery tray rails anchored into the 3K side frames, with patented spring loaded locking mechanism, allowing for fast battery gain access to in addition to battery defense.
6. Top mounted motor base bringing the motor's center of mass closer to turning disc, enhancing 3D agility and allowing blade drafts to cool the motor efficiently.
7. Motor mount consists of 3rd bearing block to offer motor shaft assistance, efficiently reduce torque induced shifts, and lessen gear striping concern.
8. Utilizes high specification MOD1 112T CNC helical main gear and MOD 1 tail drive helical gear to increase gear mesh area, and lessen gear noise during flight.
9. Top mounted ESC platform to benefit from main blades air flow for effective cooling.
10. New light-weight H-shaped electric device retention system for defense, in addition to ergonomically proper design to streamline operation .
11. Geared up with 750MX series high efficiency brushless motor, with ribbed case and fan to significantly increase cooling effect, and improve general power output.
12. Brand new gear box with more streamlined design also allows for easier disassembly.
13. High quality new tail transmission design, integrated with new dual point mounted tail pitch control assembly to lessen slops and increase rudder control accuracy.
14. High torque ranked one way bearing base.
15. High accuracy bearing supported dual push point rudder control design.
16. High speed ranked thrust bearings included into tail blade grips.
17. Geared up with 3rd bearing main shaft assistance to increase rigidity, meeting the needs of extreme 3D maneuvers.
18. New light-weight landing gears.
19. High grade painted fiberglass canopy with new 4 point anti-vibration mounting mechanism to streamline setup.
20. New CNC aluminum alloy mounting plate.

Users must have a certain concept of security to run the R/C helicopters.
Be sure to read and comply with related safety notes of user's manual prior to flying.

Requirements(3GX Programmable Flybarless System):
Operating Temperature level:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system assistance
Integrated in guv function
Optimum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognization

Requirements(T-REX 700E V2):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Diameter: 1562mm
Tail Rotor Diameter: 281mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Own Gear: 104T
Tail Own Gear: 22T
Own Gear Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Accessories:
T-REX 700E DFC Sets Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
DS615 Digital Servo x 3
DS650 Digital Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
6A External BEC x1
105mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge