Align T-REX 700E DFC Super Combo

Direction(3GX Programmable Flybarless System):
Brand new redesigned 3GX represents a new generation of multi function flybarless system. The considerably enhanced efficiency will develop instant influence on any lovers.
3GX is presently the smallest and lightest flybarless system on the marketplace. Two ports to straight connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all the CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical highlighted direction on the computer setup software directs the user through an action by action setup process, enabling fast setups without omitting any steps.
Support Bluetooth connection. With the soon to be launched Bluetooth connection set, 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to decrease electronic wire clutters.
Custom criteria have actually been opened up in 3GX to permit pilots to tweak many settings for swashplate and rudder. Settings export feature allows customized settings to be shared among buddies.
3GX utilizes brand name new gyroscope sensing units of the greatest specs when compared with other flybarless systems presently on the marketplace, enabling it to be utilized under severe conditions. Double axis plus rudder sensor considerably enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly visible in stable hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, radiance engine or electrical powered. The exceptional vibration resistant characteristic is evident even when mounted with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, together with a totally re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with precision.
3GX's rudder allows constant rudder feel even under high speed conditions. This outstanding control feel will permit pilot of all ability levels to experience the ideal integration in between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the capability to self support, hold position as well as altitude, as well as autonomous method point flights as well as return home.

Specification(T-REX 700E V2):
1. Equipped with the low CG DFC rotor head, effectively decrease wind resistance during flight, providing the most direct and accurate control feel back to the pilot, and shows exciting 3D efficiency and unthinkable flight speed.
2. Brand new CCPM direct servo linkage design to eliminate the weight of double push-pull linkage system, making it possible for faster and more accurate control response.
3. Integrated servo installs on the main shaft bearing blocks, enabling cyclic servos to be mounted straight onto the bearing blocks, which together with the composite product frame plates, producing a clean and uncluttered appearance.
4. Uses composite carbon product integration method on frame structure for ease of upkeep and high rigidity. Increased front opening location to enable easier battery setup.
5. Ingenious sliding battery tray rails inserted into the 3K side frames, with patented spring packed locking system, enabling fast battery access as well as battery protection.
6. Leading mounted motor base bringing the motor's center of mass closer to rotating disc, enhancing 3D agility and enabling blade drafts to cool the motor effectively.
7. Motor install consists of third bearing block to provide motor shaft support, effectively decrease torque caused shifts, and lessen equipment striping issue.
8. Uses high spec MOD1 112T CNC helical main equipment and MOD 1 tail drive helical equipment to increase equipment mesh location, and lessen equipment noise during flight.
9. Leading mounted ESC platform to make the most of main blades airflow for reliable cooling.
10. New lightweight H-shaped electrical gadget retention system for protection, as well as ergonomically proper design to streamline operation .
11. Equipped with 750MX series high performance brushless motor, with ribbed case and fan to considerably increase cooling impact, and enhance overall power output.
12. Brand new gear box with more structured design likewise permits easier disassembly.
13. High quality new tail transmission design, integrated with new double point mounted tail pitch control assembly to lessen slops and increase rudder control precision.
14. High torque ranked one method bearing base.
15. High precision bearing supported double push point rudder control design.
16. High speed ranked thrust bearings included into tail blade grips.
17. Equipped with third bearing main shaft support to increase rigidity, satisfying the needs of severe 3D maneuvers.
18. New lightweight landing gears.
19. High grade painted fiberglass canopy with new 4 point anti-vibration mounting system to streamline setup.
20. New CNC aluminum alloy mounting plate.

Users should have a specific concept of security to run the R/C helicopters.
Be sure to check out and abide by related security notes of instruction manual prior to flying.

Specification(3GX Programmable Flybarless System):
Operating Temperature:-10~60 degree
X and Y axis Operating Angle Variety:-300~+300 degree
Z axis Operating Angle Variety:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces initial factory receiver)
Futaba S.BUS system support
Built in guv function
Maximum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Suitable with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type recognization

Specification(T-REX 700E V2):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Size: 1562mm
Tail Rotor Size: 281mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Own Gear: 104T
Tail Own Gear: 22T
Own Gear Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Devices:
T-REX 700E DFC Kits Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
DS615 Digital Servo x 3
DS650 Digital Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
6A External BEC x1
105mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge