Align New Landing Skid

This is an upgrade landing skid set for the Align 600 and 600N line of helicopters. More stiff than the standard landing gear these have a reduced height for a lower center of mass preferable for 3D flying.

Plan includes:

2 - Black landing skids around 39g each.




Here is a excellent thing that many others have actually bought at the exact same time.

Skid Pipe

Apply to T-REX 550E.

Requirements:
Skid pipe x 2(Φ7.4xΦ9x294mm)
Skid pipe end cap x 4

The listed below thing also sets truly well with the thing being reviewed.

Skid Pipe/Black

Use for T-REX 600/600 Nitro
Requirements:
Skid pipe x 2(Φ9x310mm)
Skid pipe end cap x 4

Here is a excellent thing that many others have actually bought at the exact same time.

450DFC Main Shaft

Use for T-REX 450DFC. H45162/162QN

Requirements:
450DFC Main shaft x 2
Socket Button Head Collar Screw x 2(M2x12mm)
M2 nut x 2
Weight:33g

Numerous others have actually purchased this thing in addition to the thing that you are presently reviewing.

M0.6 Torque Tube Front Drive Gear Set/ 26T

This is the Align M0.6 26T Torque Tube Front Drive Gear Set for the T-Rex 450DFC.

Features:

Black and silver colored
Made of metal and plastic
For the Align T-Rex 450DFC

Consists of:
One Align M0.6 26T Torque Tube Front Drive Gear Set

Here is a excellent thing that many others have actually bought at the exact same time.

Torque Tube Rear Drive Gear Set

This is the Align Torque Tube Rear Drive Gear Set for the T-Rex 450.

Features:

Black and silver colored
Made of metal and plastic
For the Align T-Rex 450

Consists of:
One Align Torque Tube Rear Drive Gear Set

You will love this thing if you have the thing just above mentioned.

M0.8 Torque Tube Front Drive Gear Set/34T

Use for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

You will love this thing if you have the thing just above mentioned.

Torque Tube Rear Drive Gear Set

Use for T-REX 550/600 class.

Requirements:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

Numerous others have actually purchased this thing in addition to the thing that you are presently reviewing.

Landing Skid

Requirements:
Landing skid x 1
Washer x 2(Φ2.6xΦ5.8x0.6mm)
Socket button head screw x 2(M2.5x10mm)

Here is a excellent thing that many others have actually bought at the exact same time.

Main Shaft Set (2)

This is a replacement Align Main Shaft Set, and is intended for usage the Align 550EFL and 600E Pro helicopters.
Consists of:

(2) Main shaft (6x10x177mm)
(2) Socket collar screw (M3x20mm)
(2) 3 nut

 

Here is another thing that compliments the thing being reviewed.

325D 3G Carbon Fiber Blades

This is a set of Align 325D Pro Carbon Fiber Blades, and are intended for usage with the Align T-REX 450 household of helicopters. These blades are made from 3K carbon fiber material, with a unique forming technique that enhances anti-twist, making these blades ideal for severe 3D flight.
Specifications:

Forming: Symmetrical wing

Length: 325x32mm

Width: 4.7mm

Shaft Size: 3mm

Weight: 46g/set

Here is another thing that compliments the thing being reviewed.

Tail Boom (Black)

Requirements:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

This thing compliments the above reviewed thing.

Torque Tube

Use for T-REX 550E.

Requirements:
Torque tube x 1
Bearing MR148ZZ x 1(Φ8xΦ14x4mm)

Numerous others have actually purchased this thing in addition to the thing that you are presently reviewing.

Tail Boom Brace

Request T-REX 550E

Requirements:
Tail boom brace set x 2
Tail boom brace x 2(Φ1.9xΦ3.9x412mm)
Self tapping screw x 2(M3x10mm)
Self tapping screw x 2(T3x10mm)
M3 washer x 4(Φ3xΦ8x1mm)