Align 470L Counter Thread Main Linkage Rod Set

Usage for T-REX 470L

470 Linkage Rod x 5
Ball Link x 10

The listed below product additionally sets really well with the product being reviewed.

Servo line Color Black & Green

Wanting to tidy up the appearance of your helicopter, plane of RC automobile & protect your servo lines from chaffing? Servo Line Covering is a simple method to protect your servo wires, including a clean, visual want to your RC machine, and can be installed in a matter of minutes. Choose from our amazing line of different colors to add an entire new look to your RC machine!

Included In Plan:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply eliminate your servo(s) from the receiver, measure the length of covering you will need for your servo wire(s), and open one end of the covering and insert the servo terminal inside. It works best to "inch worm" your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pressing the terminal forward.

Once your servo wire is covered, cut off a proper sized piece of the consisted of heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, thus offering you a flush, tight fit over the previously frayed servo covering. Do the very same with completion of your servo wire, taking care to leave the terminal bare so it can quickly plug into your receiver. Also, make certain to keep in mind of the servo wire polarity if you cover the complete wire – this will make sure that you will know exactly what instructions to plug your servo terminal into your receiver.