ZAP 1Oz Z-Poxy 5 Min Syringe

This is Pacer's 5 Minute Epoxy & Hardener with the Syringe Applicator.

FEATURES:
Pacer epoxy adhesives remedy and sign up with everythings together by a chemical
    reaction in between the resin and hardener. This reaction results in
    high strength bonds that are resistant to most chemicals.
Use for home, commercial, crafts, or any task that requires
    a high-strength, top quality bond.
Best used on these products:
    -Metal & Wood
    -Concrete
    -Glass & China
    -Ceramics
Clear drying color.
Working time (time readily available to blend & apply item & position
    repair): 5 minutes.
Handling time (the amount of time repair need to remain stationary for
    item to set): 15 minutes.
Full bond strength in one hour.
PSI strength: 1,500 pounds per square inch.
Water resistant.
It is not flammable.
Working temperature level range (once fully cured it can endure this
    temperature level range): -40°F to +176°F.
The unique applicator features a patent pending design that makes
    it easy to give and blend the correct amount of adhesive for any
    task. The snap off cap removes hazardous cutting of television ends
    while the snap out paddle in the manage makes it easy to blend.
    Nozzle design lets even the thickest products flow easily.
    Reseals for storage.
Directions on package.

INCLUDES:
One Applicator with 5 Minute Epoxy and Hardener

SPECS:
Net Volume: 1oz (28.3g)

REMARKS:
Not recommended above 176°F (93°C). If temp is listed below 40°F, 5°C,
    (5°C), hardening time is considerably longer.

You will certainly like this thing if you have the thing previously discussed.



This is a 20 Gram Bottle of Zap-O Odorless CA+ Glue from Pacer.

FEATURES:
An odor free CA that truly works!
Great on styrofoam and foam, without a primer.
Medium thick, sluggish cure.
Works on balsa, plywood and most other pastime materials.
No-more-tears formula.
Won't fog most clear plastics.
**To treat correctly, Zap-O Foam Safe CA should be used with Zap Foam
    Safe Kicker (PT28)**

INCLUDES:
One 20 Gram Bottle of Zap-O Odorless CA+ Glue.

SPECS:
20 Grams

This thing is regularly purchased with the above mentioned thing.



    This is the Great Planes Pro CA activator with a pump.
Compatible with the majority of foams.

For thick and medium CA that doesn't treat as fast as the immediate. All you have
to do is apply the CA then spray the Activator on the CA and it cures almost
immediately. Another way is to very first apply the activator to a piece of balsa
you want to sign up with to another piece, then include CA to the other piece.
When you put them together, you have an instantaneous glue joint. The pump makes life
that much simpler, just hold the bottle 4-6" away from area you are spraying
and pump one or two times and it's done.

INCLUDES:
One 2oz bottle of Activator
One pump

REMARKS:
CAUTION, Constantly spray on a test area first, and ALWAYS use safety
    glasses.