Vanquish Products VS4-10 Pro Black Anodized - Origin Halfcab

VS4-10 Pro
The VS4-10 Pro represents the leading tier of RC scale car kits, offering the greatest quality products, exceptional style, and the most resilient platform readily available in its market. The VS4-10 Pro provides a list of features that have actually never been matched, offering a building and driving experience out of package that are sure to impress.

VFD Transmission
The VFD Transmission from Vanquish Products is designed to offer an ideal balance of efficiency, scale look, strength and flexible optional devices. The VFD's style puts the motor forward and as low as possible to keep the weight where you want it. The VFD's mix of balanced out front T-case output and balance out pumpkin of the Currie front axle make this possible. The T-case uses distinct aluminum bearing plates for high strength bearing positioning and the elimination of flex discovered in standard plastic housings. The modular style of the bearing plates permit optional equipment ratios used to be used inside the T-case.

Aluminum Bearing Plates

Wide Profile Steel Machined Equipments

Overdrive Gear Set (6.5% OD)

Hardened Chromoly Shafts

Market standard 32P stimulate gears

Low Motor Position (540 Size)

Complete ball bearing transmission

Extended Skid Plate for Motor Security

Offset front output for balanced out front axle configuration

Scale Molded Transmission Housing

6mm Aluminum motor plate

Molded Spur Equipment Cover

Optional Overdrive equipment sets readily available

Topshaft with slipper eliminator

32P 56T Spur and 15T Pinion

VS4-10 Chassis
Vanquish Products VS4-10 Chassis is made to offer you with a balance scale looks and unhindered efficiency. The steel C-channel style provides scale information, molded front and rear cross members fill the chassis rails in the greatest tension locations for ultimate strength and offer features like double servo mounts, winch line routing, and a fuel cell. The molded rock sliders come with a replaceable external portion that completely fits the Origin Halfcab body. The VS4-10 chassis is developed to work with the consisted of Vanquish Products VFD transmission. The panhard install on the chassis is made from machined aluminum to withstand the impacts of serious trail conditions. Formed shock towers capture the top of the 90mm Cut Scale Shocks in double shear for maximum assistance. The aluminum battery and electronics trays offer several locations for battery and electronics placement. Complete width molded front and rear bumpers increase technique and departure angles and permit flexibility throughout effect on the trail.

C-Channel Chassis Bed rails

Chassis Mounted Servo

Aluminum Panhard Mount

Double Shear Shock Installing

Well Balanced Battery and Electronic Devices Tray Arrangement

Molded Front and Rear Bumpers

Molded Rock Sliders

Molded Lexan Inner Fenders

Servo Winch Mounting Place

Bodyside Retaining Guides

Optional Rear Upper Link Mounting Locations

Optional Front Upper Link Mounting Locations

Standard Chassis Bumper Installing Geometry (Fits popular post design bumpers)

VS4-10 Pro Drivetrain
The VS4-10 Pro drivetrain uses the brand-new VFD transmission and our proven axles you already know and trust. The certified Currie Enterprises F9 design front axle features a balanced out front differential real estate and uses chromoly VDI universal axle shafts, high-pinion hypoid ring equipment, chromoly 6 bolt spool and patent pending one-piece bearing retainers to develop an incredibly scale and resilient front axle assembly. Integrated inner c-hubs develop an unrivaled scale look and are strengthened to offer the most resilient axle real estate possible, with quickly replaceable chromoly threaded inserts for the knuckle king pin screws. The rear Currie F9 design axle features a centered differential real estate and equal length chromoly axle shafts, with the same gears and spool discovered in the front axle.

VFD Transmission

Currie Enterprise Axle Real Estates

Offset Front Pumpkin

Focused Rear Pumpkin

High-Pinion Hypoid Axle Equipments

6-Bolt Ring Gear and Spindle

Chromoly VDI front axles

Integrated Inner C's

Chromoly Threaded Inserts

One-Piece Bearing Retainers (patent pending)

Aluminum Knuckles with Scale High Steer Arm

Chromoly Rear Axle Shafts

Scale F9 3rd Members

Double Shear Shock Mounts

Aluminum 12mm Hexes

Cut Steel Driveshafts

Complete Ball Bearing

Origin Halfcab Body
The Origin Halfcab polycarbonate body provides retro styling with a contemporary style. The complete polycarbonate interior was designed by Knight Customs with front container seats, a comprehensive dash and large freight area in the back. The dash attaches to the interior and molded plastic details like guiding wheel and equipment shifter aid bring the interior to life. The comprehensive front grill assembly is injection molded and features 10mm LED prepared headlight buckets, with a scale radiator assembly, fans, and fan shrouds. In addition, the front light buckets can be replaced with optional Vanquish Rigid Industries Q-Series light pods for even more light! The rear light buckets fit 5mm LEDs, so everybody will take notification when you are coming or going. Other scale details like windshield wipers, door deals with and fuel filler cap are consisted of to step up the look even further. The entire body, interior and installing holes are all laser cut – so all you require to worry about is paint.

Retro Halfcab Styling

Molded Front Grill

Complete Interior

Different Dash

Molded Steering Wheel and Equipment Shifter

10mm LED Ready Headlight Buckets

5mm LED Ready Taillight Buckets

Formed Scale Radiator

Molded Fans and Shrouds

CNC Laser Cut

Extra Scale Particulars (Wipers, Door Handles, Fuel Filler)

Window Trim, Interior and Logo Decals

Paint Masks

VS4-10 Suspension
The VS4-10 features Cut 90mm Scale shocks with aluminum threaded bodies, double X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension provides scale looks by keeping the servo out of sight, while still offering space for large suspension travel. The suspension rotates on a complete set of stainless-steel links to keep the weight down low with a smooth shift from the link to the rod ends. All suspension mounts are sized to fit to the rod end pivot ball completely and eliminate excess side to side play.

Cut 90mm Scale Shocks

3-link with Panhard Front Suspension

Double Triangulated 4-link Rear Suspension

Incision Stainless-steel Links

Double Shear Shock Installing

Several optional link installing positions at the chassis for suspension tuning

KMC Wheels and VXT Tires
The VS4-10 includes Cut KMC Machete plastic beadlock wheels and Vanquish VXT tires. The wheels are true beadlocks and work with all Cut aluminum hub alternatives. The VXT tires are 4.65" tall and are molded in a soft and sticky natural rubber compound for efficiency right out of package. Company foams are used to offer sidewall assistance that helps prevent the tire from rolling over, while keeping the tread in contact with the surface.   

Cut KMC Machete Beadlock Wheels

Adjustable Offset Design

VXT 4.65" Tires

Soft and Sticky Natural Rubber Substance

Company Tire Foams

Specifications

12.3" Wheelbase

9.4" (240mm) Total Width

19.3" (490mm) Total Length

9.8" (250mm) Total Height

3.75:1 Axle Ratio

Internal Trans Ratio: Front 2.95 / Rear 3.15

Total Equipment Ratio: Front 41.3 / Rear 44.0

Overdrive Portion: 6.5%

15T (3mm shaft) 32P Pinion Included

56T 32P Spur Equipment Included

 

Required Items

Shock Oil

Tools

Paint

Grease (VPS01017 Recommended)

Threadlock

Battery

Charger

Radio System

540 size Motor (3mm Motor Shaft Recommended)

ESC

Steering Servo

Servo Horn (20mm Length Recommended)

 

Alternative Parts Available

1.9 Beadlocks

Currie Swaybar

Rigid Lightbars

Rigid Q Series (Can be fitted as headlights)

VFD Transmission Dig

VFD Overdrive Equipment Sets

VFD Titanium Topshaft

Knight Customs Add-on on Shapeways.com

 

Notes:
VS4-10 PRO is revealed with products that are not consisted of with the kit. Please see list of needed items.

No electronics are supplied with the VS4-10 PRO Kit.

No Receiver box is consisted of with the VS4-10 PRO kit.

Items and specifications undergo change.

Assembly Required. Kids 14 and under should have adult supervision.