Vanquish Products VRD Carbon - Kit

Instruction manual located here - Modification 1 (Page 20 screw lengths upgraded)

VRD CARBON PACKAGE
The Vanquish Products VRD Carbon Package is our very first competition level platform brought to life by some of the industry's most experienced designers in the RC rock crawling section.  Utilizing an all brand-new Lightweight Spec VFD Transmission and upgraded F10 competition inspired portal axles the VRD Carbon Package is a highly competitive, foreseeable and flexible platform.  The heart of the VRD Carbon Package is a matte surface 3mm thick set of carbon fiber frame rails mated to the 6 degree flat skid plate.  The molded chassis components and skid plate place the light-weight specification VFD transmission as low as possible into the VRD chassis.  For the very first time the front F10 Website axle is geared up with a servo on axle and 4-link.  Front and rear axles include weighted brass tube inserts in addition to the front alloy knuckle weights to keep the center of gravity as low as possible, equating to a high efficiency driving experience.  

Light-weight Spec VFD Transmission

3mm Matte Carbon Fiber Frame Rails - 6 degree flat skid plate

37% Overdrive 

F10 Website Axles

Brass weight tubes in axles

Alloy heavy portal knuckle weights

Front Axle Overdrive Website equipments

Rear Axle Requirement Website Gears

Light-weight Machined Chromoly VFD Transmission Gears

Machined Spool, Ring Equipment, Pinion gear in axles

Chromoly Universal axle shafts

Tough Anodized Shock Bodies

Stainless Steel Hyperlinks with HD Bent rear links

Cut Pro M4 Rod Ends

Stamped Aluminum Rock Sliders

Adjustable multi point body mounting system

Chassis

The Vanquish Products VRD Carbon chassis is geared up with all brand-new molded chassis components that provide a tunable platform to adjust to the most requiring surface.  Numerous shock and body mounting positions integrated with minimalistic front/rear interchangeable bumpers make body mounting and fitment direct.  Stamped aluminum rock sliders provide a flat place for electronic devices and/or battery mounting and are able to support and secure your body.  

Drivetrain

The center of the VRD Carbon Package is the brand-new light-weight specification VFD transmission.  Equipped with a lightweight machined aluminum motor plate, aluminum motor plate standoffs, while leaving out the cosmetic VFD tunnel for a high efficiency look.  Internally the VFD is geared up with machined aluminum bearing plates and machined light-weight chromoly equipments.  Each internal gear has been re-designed to be as light-weight as possible dropping the weight of the general transmission however maintaining a high level of sturdiness.  The T-Case has a built in 21% overdrive.  

The Front F10 Website axle has overdrive portal equipments while the Rear F10 website axle has the standard ratio equipments, integrated with the VFD overdrive the last overdrive percentage is 37%.  Both axles include brass weighted tubes inside in addition to the alloy portal knuckle covers on the front axle.  This is the heaviest spec F10 axle yet keeping the center of gravity as low as possible and the weight predisposition forward.  

Suspension

The VRD Carbon Package includes the Cut S8E shocks with difficult anodized shock bodies and numerous length tuning rod ends for a final length series of 85-95mm.  Heavy duty stainless-steel lower suspension links and light-weight upper links connect the chassis to the axles with the brand-new Cut Pro M4 rod ends.  The rear lower links are bent for optimum breakover clearance.  Numerous shock mounting areas and tunable shock length enable a high series of ride height and breakover change.  

Specs

1/10th Scale

Front Axle Ratio 5.25:1

Rear Axle Ratio 6.25:1

Pinion 15T 32P

Stimulate 52T 32P

Total Width Hex to Hex - 200mm (7.87”)

Wheelbase - 322mm (12.67”)

Total Front Ratio 46.5:1

Total Rear Ratio 68:1

Last Overdrive 37%

Needed Products to Complete:

Tools

Paint

Comp Style Body

1.9 x 4.75” Tires (recommended)

1.9 Wheels (Vanquish Products or SLW Center Compatible wheels required)

Transmitter / Receiver

Steering servo (25 spline 20mm Servo Horn consisted of)

540 Motor

ESC

Battery (35mm x 35mm x 100mm Optimum)

Battery charger