Vanquish Products VRD Carbon - Kit

Instruction manual found here - Revision 1 (Page 20 screw lengths upgraded)

VRD CARBON SET
The Vanquish Products VRD Carbon Package is our really first competition level platform brought to life by some of the industry's most skilled designers in the RC rock crawling sector.  Using an all new Lightweight Spec VFD Transmission and upgraded F10 competition motivated portal axles the VRD Carbon Package is an extremely competitive, foreseeable and flexible platform.  The heart of the VRD Carbon Package is a matte finish 3mm thick pair of carbon fiber frame rails mated to the 6 degree flat skid plate.  The molded chassis components and skid plate location the lightweight spec VFD transmission as low as possible into the VRD chassis.  For the very first time the front F10 Website axle is geared up with a servo on axle and 4-link.  Front and rear axles include weighted brass tube inserts in addition to the front alloy knuckle weights to keep the center of gravity as low as possible, translating to a high performance driving experience.  

Lightweight Spec VFD Transmission

3mm Matte Carbon Fiber Frame Rails - 6 degree flat skid plate

37% Overdrive 

F10 Website Axles

Brass weight tubes in axles

Alloy heavy portal knuckle weights

Front Axle Overdrive Website gears

Rear Axle Requirement Website Gears

Lightweight Machined Chromoly VFD Transmission Gears

Machined Spindle, Ring Equipment, Pinion equipment in axles

Chromoly Universal axle shafts

Hard Anodized Shock Bodies

Stainless-steel Hyperlinks with HD Bent rear links

Incision Pro M4 Rod Ends

Stamped Aluminum Rock Sliders

Adjustable multi point body installing system

Chassis

The Vanquish Products VRD Carbon chassis is geared up with all new molded chassis components that provide a tunable platform to adjust to the most demanding terrain.  Numerous shock and body installing positions integrated with minimalistic front/rear interchangeable bumpers make body installing and fitment direct.  Stamped aluminum rock sliders provide a flat area for electronics and/or battery installing and are able to support and protect your body.  

Drivetrain

The center of the VRD Carbon Package is the new lightweight spec VFD transmission.  Geared up with a lightweight machined aluminum motor plate, aluminum motor plate standoffs, while leaving out the cosmetic VFD tunnel for a high performance appearance.  Internally the VFD is geared up with machined aluminum bearing plates and machined lightweight chromoly gears.  Each internal equipment has actually been re-designed to be as lightweight as possible dropping the weight of the general transmission however maintaining a high level of durability.  The T-Case has actually an integrated in 21% overdrive.  

The Front F10 Website axle has overdrive portal gears while the Rear F10 portal axle has the basic ratio gears, integrated with the VFD overdrive the last overdrive percentage is 37%.  Both axles include brass weighted tubes inside in addition to the alloy portal knuckle covers on the front axle.  This is the heaviest spec F10 axle yet keeping the center of gravity as low as possible and the weight bias forward.  

Suspension

The VRD Carbon Package includes the Incision S8E shocks with difficult anodized shock bodies and numerous length tuning rod ends for a final length range of 85-95mm.  Heavy duty stainless-steel lower suspension links and lightweight upper links link the chassis to the axles with the new Incision Pro M4 rod ends.  The rear lower links are bent for optimum breakover clearance.  Numerous shock installing locations and tunable shock length enable a high range of trip height and breakover modification.  

Requirements

1/10th Scale

Front Axle Ratio 5.25:1

Rear Axle Ratio 6.25:1

Pinion 15T 32P

Stimulate 52T 32P

General Width Hex to Hex - 200mm (7.87”)

Wheelbase - 322mm (12.67”)

General Front Ratio 46.5:1

General Back Ratio 68:1

Final Overdrive 37%

Required Products to Complete:

Tools

Paint

Compensation Design Body

1.9 x 4.75” Tires (advised)

1.9 Wheels (Vanquish Products or SLW Hub Compatible wheels required)

Transmitter / Receiver

Steering servo (25 spline 20mm Servo Horn consisted of)

540 Motor

ESC

Battery (35mm x 35mm x 100mm Optimum)

Charger