Traxxas Ultra Shocks Xxl Grey (2)

This is a set of the Ultra Shocks for the Traxxas T-Maxx 3.3.

FEATURES:
Gray composite bodies
Stock replacement T-Maxx 3.3 unassembled shocks
Preload spacers and 2 red springs

CONSISTS OF:
2 Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of silicone
    oil and assembly diagram

REQUIRES:
Assembly

REMARKS:
2 sets are needed if replacing all shocks.
Progressive Rate White Springs are likewise offered, TRAC9557.

Want one more great thing to enhance the above pointed out thing?

Ultra Shocks Grey Long

This is a set of the Long Ultra Shocks from Traxxas
for the Bandit Extreme.

FEATURES:
Gray composite bodies
Preload spacers and 2 red springs

CONSISTS OF:
2 ultra long grey shocks with bottle of silicone
    oil and assembly diagram

REQUIRES:
Assembly

REMARKS:
2 sets are needed if replacing all shocks.

This thing praises the main item here.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made of stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Likewise called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Get this thing to improve the one you are reading around.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all variations of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building

CONSISTS OF:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Setup, NOTE-four bundles are needed to change all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Thickness: 0.33" (8.4mm)

The below thing also sets truly well with the thing being gone over.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with connectors

REQUIRES:
Setting up in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided