Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

Want one more great thing to compliment the above mentioned thing?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

This thing praises the above discussed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the above discussed thing.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
2 rear arms
One Proline decal

NEEDS:
Installation onto vehicle

Frequently purchased with the thing that you are currently reading about.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Used on Front or Rear

CONSISTS OF:
2 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Get this thing to enhance the one you are reading around.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Installation on the vehicle

Below is one more thing that praises the thing being discussed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

Several others have purchased this thing together with the thing that you are currently reading about.

Large Servo Saver

This is a big servo saver that can be utilized in Traxxas cars or any car that
needs a big design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to install the saver
on many popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the guiding linkages.

This thing is regularly purchased with the above mentioned thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93