Traxxas TRX-4 Sport Blue

Features
Difficult, Lightweight Pickup Truck Body
Low profile bumpers for increased clearance
Red differential covers and D-rings
Trail-Tuned XL-5 HV Water Resistant Electronic Speed Control
Completely water resistant style
5 drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Trail Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / immediate reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, effective heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
2 stage low voltage security (LVD)
Motor
Effective TitanT 21T reverse rotation motor with internal cooling fan
Exact predetermined equipment mesh adjustments
Motor retention different from equipment mesh
Portal Axles
Increase ground clearance
Get rid of torque twist
Steel gears
Enhance axle geometry and decrease stress on driveshafts

Stiff Steel Frame
1.5mm thick steel frame rails increase torsional rigidness
Ingenious style enables four wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips incorporated into frame rails
Drivetrain
Full-time shaft driven 4-wheel drive
Difficult 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Spool-locked front and rear differentials
Steel equipment transfer case
Ingenious Battery Compartment
Hinged battery strap enables quick and easy battery gain access to
No pins to lose
Accommodates different height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Transmission
Single-speed with steel gears
Dual horizontal shafts
Twin friction plate slipper clutch
Easily gotten rid of for servicing

Steering
Chassis installed 2075X metal equipment digital servo
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry corrected for bump steer
Suspension
Front - 3 link with panhard
Rear - triangulated 4 link
Sturdy rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends
Aluminum GTS Shocks
Oil-filled coilover GTS shocks special to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars easily adjust flight height
Silky smooth damping for the hardest trails
O-ring cap seal and dual X-ring shaft seals
Wheels and Tires
Rugged black 5-spoke wheels
Pre-mounted 1.9" Canyon Trail tires with trail-tuned foam inserts
Trail tuned S1 rubber substance
12mm steel hex
TQT 2.4GHz 2-channel transmitter
Patented O-Ring Sealed Watertight Receiver Box Keeps the Micro Receiver Dry
Sealed Ball Bearings
Hex Hardware with Rust-Resistant Black Oxide Finish

Specs
Length: 21.93 inches (557mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 5.79pound (2.63kg)
Height: 9.47 inches (241mm)
Wheelbase: 12.28 inches (312mm)
Approach Angle: 58.82°
Departure Angle: 45.83°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electrical): 21T Reverse Rotation
Transmission: Single Speed
Gear Pitch: 32P
Differential Type: Spindle (no differential)
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQT 2.4GHz 2-Channel Transmitter
Receiver: 6519
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H