Traxxas TRX-4 SPORT ASSEMBLY KIT:

Easy to follow full-color assembly manual
True-to-scale part illustrations and ruler charts
Handy assembly ideas and clear illustrations
Clear TRX-4® Sport body
Body comes pre-cut and ready to mount
Consists of window masking and decals
Consists Of Expedition Rack with scale accessories
Front grille and rear tail gate with lenses for LED lights
Rugged front and rear bumpers with red D-rings
(Needs polycarbonate paint)
Portal Axles
Increase ground clearance
Remove torque twist
Steel gears
Improve axle geometry and lower strain on driveshafts
Rigid Steel Frame
1.5 mm thick steel frame rails increase torsional rigidness
Innovative style allows 4 wheelbase positions (300 mm, 312 mm (standard), 324 mm, 336 mm)
Adjustable rear shock tower positions
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips integrated into frame rails
Drivetrain
Full-time shaft driven 4-wheel drive
Hard 6 mm stub axles
Steel front CV driveshafts
Hardened steel rear axle shafts
Steel equipment transfer case
Innovative Battery Compartments
Hinged battery strap allows fast and easy battery gain access to
No pins to lose
Accommodates different height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Transmission
Single-speed with steel gears
Twin friction plate slipper clutch
Quickly removed for maintenance
Steering
Accepts standard size servos
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry remedied for bump guide
Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Pre-assembled sturdy rod ends with steel hollow balls
5 mm size steel link rods with 4 mm threaded ends
Pre-assembled aluminum GTS Shocks
Coilover GTS shocks exclusive to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly adjust trip height
Silky smooth damping for the most difficult tracks
O-ring cap seal and dual X-ring shaft seals
Shock oil consisted of in kit
Wheels and Tires
1.9" Canyon Trail tires with trail-tuned foam inserts
Hard black scale wheels
Trail tuned S1 rubber substance
12 mm steel hex
Tire glue needed
Trademarked O-Ring sealed watertight receiver box keeps micro receivers dry
Sealed Ball Bearings
Hex hardware with rust-resistant black oxide finish
Specs
Length: 21.93 inches (557 mm)
Front Track: 9.78 inches (249 mm)
Rear Track: 9.78 inches (249 mm)
Ground Clearance: 3.14 inches (80 mm)
Weight: 92.6 ounces (2.63 kg) (with electronic devices installed)
Height: 9.47 inches (241 mm)
Wheelbase: 12.28 inches (312 mm)
Front Shock Length: 3.54 inches (90 mm)
Rear Shock Length: 3.54 inches (90 mm)
Technique Angle: 58.82°
Departure Angle: 45.83°
Breakover Angle: 59°
Front Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Front Tires: 4.64 x 1.89 inches (118 x 48 mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48 mm)
Wheel Hex: 12 mm
Speed Control: Offered separately
Motor (electrical): Offered separately
Differential Type: Spool (no differential)
Transmission: Single speed
Equipment Pitch: 32
Chassis
Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers
Drive System: Shaft-Driven 4WD
Radio System: Offered separately
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26 mm H