Traxxas TRX-4 Ford Bronco: Sunset

Formally Certified Ford Bronco Body
Scale information: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Genuine decal sheet
Full Nylon composite wheel wells and floor pans
Additional scale accessories sold separately

Trail-tuned XL-5 HV Waterproof Electronic Speed Control
Completely waterproof style
Five drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Trail Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instantaneous reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Big, efficient heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
Two phase low voltage defense (LVD)

Motor
Powerful TitanT 21T reverse rotation motor with internal cooling fan
Precision, predetermined equipment mesh changes
Motor retention separate from equipment mesh

Website Axles
Boost ground clearance
Remove torque twist
Steel equipments
Enhance axle geometry and lower pressure on driveshafts

Rigid Steel Frame
1.5mm thick steel frame rails increase torsional rigidity
Innovative style enables 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB configurations
Bumpers change fore and aft
Rugged rock rails change for width
Wire routing clips incorporated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Tough 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Remote locking steel equipment differentials with cable-actuation
Steel equipment transfer case

Innovative Battery Compartment
Hinged battery strap enables fast and easy battery access
No pins to lose
Accommodates various height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller 1/16 scale batteries (with optional strap)

Transmission
Two speed high/low variety with remote moving
Dual horizontal shafts
Twin friction plate slipper clutch
Quickly removed for servicing

Steering
Chassis mounted 2075X metal equipment digital servo
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry remedied for bump guide

Suspension
Front - 3 relate to panhard
Rear - Triangulated 4 link
Sturdy rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks unique to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly change flight height
Silky smooth damping for the most difficult trails
O-ring cap seal and double X-ring shaft seals

Wheels and Tires
Reproduction chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Trail tires with trail-tuned foam inserts
Trail tuned S1 rubber compound
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link enabled
Telemetry ready #6533 5-channel micro receiver with failsafe
Automatically shops and loads settings for approximately 30 Traxxas Link enabled models
Unique Cruise Control feature for prolonged trail driving
Adjustable steering and throttle level of sensitivity (exponential)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Trademarked O-ring sealed watertight receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide finishing

Specifications
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42pound (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Method Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electric): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Gear Pitch: 32P
Differential Type: 4 Gear, Remote Locking
Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H