Traxxas TRX-4 Ford Bronco: Sunset

Officially Accredited Ford Bronco Body
Scale information: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Authentic decal sheet
Complete Nylon composite wheel wells and floor pans
Additional scale devices offered separately

Trail-tuned XL-5 HV Waterproof Electronic Speed Control
Fully waterproof style
Five drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Trail Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / immediate reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Big, effective heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
2 phase low voltage defense (LVD)

Motor
Powerful TitanT 21T reverse rotation motor with internal cooling fan
Accuracy, pre-programmed gear mesh changes
Motor retention separate from gear mesh

Website Axles
Boost ground clearance
Get rid of torque twist
Steel equipments
Enhance axle geometry and minimize strain on driveshafts

Rigid Steel Frame
1.5mm thick steel frame rails increase torsional rigidity
Ingenious style enables 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers change fore and aft
Rugged rock rails change for width
Wire routing clips incorporated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Difficult 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Remote locking steel gear differentials with cable-actuation
Steel gear transfer case

Ingenious Battery Compartment
Hinged battery strap enables quick and simple battery gain access to
No pins to lose
Accommodates various height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller sized 1/16 scale batteries (with optional strap)

Transmission
2 speed high/low range with remote moving
Double horizontal shafts
Twin friction plate slipper clutch
Easily gotten rid of for servicing

Steering
Chassis mounted 2075X metal gear digital servo
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry fixed for bump guide

Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Heavy-duty rod ends with steel hollow balls
5mm size steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks exclusive to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars easily change ride height
Silky smooth damping for the most difficult tracks
O-ring cap seal and double X-ring shaft seals

Wheels and Tires
Replica chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Trail tires with trail-tuned foam inserts
Trail tuned S1 rubber substance
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link enabled
Telemetry ready #6533 5-channel micro receiver with failsafe
Immediately stores and loads settings for as much as 30 Traxxas Link enabled models
Unique Cruise Control function for extended path driving
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Trademarked O-ring sealed water tight receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide covering

Specs
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42lb (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Method Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electrical): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Moving
Gear Pitch: 32P
Differential Type: 4 Gear, Remote Locking
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H