Traxxas TRX-4M Ford F-150 High Trail Edition Brown

Officially Certified Ford® F-150® Clipless Body
Highly-detailed ABS hard body
Molded-in color won't chip or flake
Hard fender flares and rock sliders
Sensible side mirrors, door manages, roll bar, & wipers
LED headlights
Durable locking clips
Hold firmly on the path
Release in just seconds
ECM-2.5™ Electronic Control Module
Incorporates ESC, receiver, and LED controller in one chassis
Completely waterproof for all-weather enjoyable
Three drive profiles
Sport Mode — forward / brake / reverse
Trail Mode — forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode — forward / instantaneous reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Built-in Pro Scale® LED performance
2 stage low voltage defense (LVD)
Motor overload defense
TQ™ 2.4 GHz Transmitter
Full-size 2-channel transmitter
All-day comfort with exact long-range control

Titan® 180 87-Turn Brushed Motor
Fixed equipment mesh does not need modification
Forward mounting position for enhanced crawling characteristics
Extended Heavy-Duty Steel Ladder Frame
Deep C-channel style
Thicker center section for optimum rigidness
Bed rails range from bumper to bumper
Drivetrain
Full-time shaft-driven 4-wheel drive
Strong steel axles
Spool-equipped front and rear axles
Durable CV center driveshafts
Low-CG Battery Tray
Concentrates weight lower for enhanced stability
Wide rubber strap protects battery in place
Optional Transmission Ratios (offered individually)
Optional Low Variety or Speed Gearing transmissions
Modular style swaps out in minutes

Steering
Durable 2065T guiding servo
Metal primary equipment
Superior 45° guiding angle
Direct steering (no servo saver)
Lifted High Trail™ Suspension
Modified shock towers
Triangulated 4 link front and rear
Durable rod ends
Oil-Filled GTM™ Shocks
Offers smooth controlled damping
Sensible driving body language
Adjustable pre-load spacers
Quickly refreshed with available rebuild sets
Wheels and Tires
1? Replica slotted chrome mag wheels
7 mm hex
Pre-mounted Mickey Thompson® Baja Pro™ XS tires
Trail-tuned rubber compound
Battery and Charger Included
High-capacity 2-cell LiPo battery with iD®
7.4 volts
750 mAh for over an hour of run time
2-amp USB-powered charger
iD® innovation for quicker, more secure charging
Low-Maintenance Self-Lubricating Bushings
Durable Hex hardware

Often purchased with the item that you are presently reading about.

2S Battery/Charger Completer Pack(1-2843X)(1-2970)

This is the Traxxas #2970 Air Conditioner Powered EZ-Peak Plus Battery Charger
and #2843X Power Cell iD 7.4V 5800mAh 25C Two LiPo Battery Completer Pack.

FEATURES:
Charger;
Charges 2-3S LiPo batteries, and 5-8 cell NiMH/NiCd batteries
Recognizes Traxxas iD batteries and immediately programs and
    enhances charger settings
One button LiPo storage charge
4amp quickly charging
2S/3S Built-in balance ports for conventional LiPo batteries
    situated under Traxxas nameplate to the left of output port
Charge progress indication
High resolution peak detection
Storage mode prepares LiPo batteries for prolonged storage
Advanced mode for full manual control, and also for batteries that
    do not have the iD Car Battery Identification
Easy to use user interface
Built-in cooling fan
Thirty day minimal guarantee through Traxxas beginning at date of
    purchase

    Battery;
Semi rigid building and construction does not need a difficult case and eliminates
wire harness adapters that can loosen and fail
Engineered specifically to fit Traxxas models
New high present adapter with gold-plated copper terminals and
incorporated balance adapter
iD Car Battery Identification allows Traxxas iD equipped chargers to
immediately set and enhance charge settings for particular battery
MAXX cable high-efficiency 12 gauge silicone jacketed wire

CONSISTS OF:
EZ-Peak Plus Battery Charger with Air Conditioner Power Cable and Instructions
    TRAP2970
Power Cell iD 7.4V 5800mAh 25C Two LiPo Battery, TRAC2844

NEEDS:
LiPo charging bag

SPECIFICATIONS:
Charger;
Air Conditioner Input: 100-240 volts
Charge Current Variety: 1.0 - 4.0A (40W max)
Discharge Current Variety: 500mAh
Existing Drain for Balance Ports: 500mAh
NiMH Battery Cell Count: 5-8 cells
LiPo Cell Count: 2-3 cells
Net Weight: 12.8oz (365g)
Dimensions: 5.7 x 4.8 x 2.08" (146 x 123 x 53mm)
    Battery;
Configuration: 2S2P
Continuous Discharge: 25C (145A)
Max Burst Rate: 50C (290A)
Watt Hours: 42.92
Charge Rate: 1C (5.8A)
Max Charge Rate: 2C (11.6A)
Dimensions: 5.3 x 0.98 x 1.8" (135 x 25 x 45mm)
Weight: 10.2oz (290g)

REMARKS:
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Release listed below 2.5V per cell
NEVER take apart or customize pack electrical wiring in any method or puncture cells
NEVER put on combustible products or leave unattended throughout
charging
ALWAYS Charge in a fire-resistant area
ALWAYS set charger's output volts to match battery volts
Constantly stay out of reach of children