Traxxas Transmitter Antenna

TRAXXAS
RADIO ADD-ON Traxxas replacement and optional parts are
readily available for your radio system. below for stock numbers, descriptions,
and costs. See the ""Introduction to Radios'' details fo an
description of the usages for these products.

This thing is frequently gotten with the above stated thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

NEEDS:
Installing in automobile

SPECIFICATIONS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not supplied

Right here is a wonderful thing that many others have bought at the exact same time.



This is the Traxxas Male Adapter to Molex Female Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to link in reverse
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals secure

CONSISTS OF:
One Traxxas male port to Molex female port adapter

REMARKS:
Molex port not appropriate for high existing use

This thing compliments the main item here.



This is the Traxxas Female Adapter to Molex Male Adapter Adapter.

FEATURES:
Shrouded wire connections (no shrink tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it impossible to link in reverse
Textured surface for simple gripping
Suitable with high-current 12-gauge wire
Secure, positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals secure

CONSISTS OF:
One Traxxas female port to Molex male port adapter

REMARKS:
Molex port not appropriate for high existing use

This is a superb addition to the thing presently being gone over.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to avoid automobile from turning over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with installing instructions and
    hardware

NEEDS:
Attaching to back of chassis

Right here is a wonderful thing that many others have bought at the exact same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building

CONSISTS OF:
Two Front bearing (center) providers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Many others have gotten this thing along with the thing that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programs ability through Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for use in almost every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
Four magnet, 4 pole rotor for greater torque
1.4" diameter slotted stator
Easily removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)