Traxxas Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Building and construction

SUCHES AS:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Density: 2.0 mm (0.082")

REMARKS:
None

This product praises the above talked about product.

Suspension Pins 44Mm Slash Rustler / Stampede / Bandit

This is a set of chrome suspension pins utilized to hold the front suspension arms
on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER.

Includes: two chrome suspension pins and three "E" type keeping clips.

Requires:absolutely nothing parts are a direct replacement.

Specs:3mm x 44mm pins are notched for the 3MM "E" type keeping clips at each
end. WLG 9-29-97

Right here is another product that praises the product being talked about.

Front Bulkhead (Black) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in many Traxxas vehicles.
The front suspension arm hinge pins go through this piece.

FEATURES:
Black nylon building and construction

SUCHES AS:
One front bulkhead

NEEDS:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is utilized on the following automobiles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede.

This product praises the main item here.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building and construction, green in color

SUCHES AS:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

Right here is a excellent product that lots of others have bought at the very same time.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead utilized in many Traxxas vehicles.
The front suspension arm hinge pins go through this piece.

FEATURES:
Gray nylon building and construction

SUCHES AS:
One front bulkhead

NEEDS:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is utilized on the following automobiles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.

The listed below product also sets really well with the product being talked about.

Front Axles (2) (R & S)

This is a Set of Stock Replacement Front Axles for the Rustler and Stampede.
These are located in the front steering blocks.

FEATURES:
Steel building and construction
Natural color

SUCHES AS:
2 front axles

NEEDS:
Absolutely nothing. These are direct replacement parts.

SPECS:
Length: 32mm (1.26")
Size: 5mm

REMARKS:
These will not work for the nitro variations. For that axle, usage
    TRAC2536.

Right here is another product that praises the product being talked about.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Durable steel building and construction

SUCHES AS:
2 48mm pins
2 34mm pins
2 30mm pins
2 28mm pins
2 25mm pins

NEEDS:
Setup on the Rustler, Stampede or Bandit

REMARKS:
For a complete suspension pin set order TRAC4940