Traxxas Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal construction

INCLUDES:
2 different plasting holders
One disk-shaped magnet
3 8mm screws
3 10mm screws

SPECS:
Magnet size: 5mm
Magnet density: 2mm

The below item likewise sets really well with the item being gone over.

Xo-1 Connector Power Tab

This is the Power Tap Adapter for the Traxxas XO-1, TRAD42**.

FEATURES:
Replaces damaged power tap adapters

INCLUDES:
Adapter with Wire and Red 2-Pin Adapter and Zip Tie

This item compliments the main item below.

Mount, Temp Sensor (Electric Motors)-Wire Tie/Thermal Pad

This is the Temperature Sensing unit Mount for the Traxxas TQi Telemetry System.

FEATURES:
For usage with electrical powered Traxxas automobiles

INCLUDES:
Mount, Plastic Tie, and Thermal Pad

Regularly gotten with the item that you are presently reviewing.

Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECS:
Diameter: 2.16" (55mm)
Thickness: .23" (6mm)

This is a superb enhancement to the item presently being gone over.

Sensor Temperature/Voltage Short

This is the Brief Temperature and Voltage Sensing unit from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature

INCLUDES:
Brief Temperature and Voltage Sensing unit

SPECS:
Length: 9.5" (241mm)

Lots of others have gotten this item along with the item that you are presently reviewing.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum construction

INCLUDES:
One slipper pressure plate
One slipper center

NEEDS:
Setup onto vehicle.

Below is an additional item that compliments the item being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Regularly gotten with the item that you are presently reviewing.

Xo-1 Sensor Rpm Long 3X4mm Bcs (2)

This is the Long RPM Sensing unit for the
XO-1 On-Road Vehicle from Traxxas, TRAD42**.

FEATURES:
Functions with the Traxxas Link system to display motor RPM

INCLUDES:
Long RPM Sensing unit with Zip Tie and 3x4mm Button Head Cap Screws

PECS: Length: 15" (381mm)

You will like this item if you have the item earlier discussed.

Xo-1 Sensor Temperature & Voltage- Long

This is the Long Temperature and Voltage Sensing unit from Traxxas.

FEATURES:
Functions with the Traxxas Link system to display battery voltage and
    temperature

INCLUDES:
Long Temperature and Voltage Sensing unit with Installing Screw

SPECS:
Length: 14" (356mm)

Want an additional excellent item to compliment the above stated item?

Sensor, Rpm (Short) / 3X4mm Bcs (2)

This is the Brief RPM Sensing unit for the
XO-1 On-Road Vehicle from Traxxas, TRAD42**.

FEATURES:
Functions with the Traxxas Link system to display motor RPM

INCLUDES:
Brief RPM Sensing unit with Zip Tie, 3x4mm Button Head Cap Screw and
    3x4mm Set Screw

SPECS:
Length: 7.5" (190mm)