Traxxas Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building
Silver in color

CONSISTS OF:
2 2x46mm Pins
Four 2x14mm Pins

REQUIRES:
Installation through suspension elements

Right here is a wonderful item that lots of others have purchased the very same time.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
2 Steering Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Installation on the car

This item compliments the main item below.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
2 front bulkhead halves
Four 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Installation over front diff assembly

This is a great enhancement to the item currently being reviewed.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Mounts
Four 2.5x18mm Cap Head Screws

REQUIRES:
Installation on the car

Right here is a wonderful item that lots of others have purchased the very same time.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Installation on the car

Numerous others have acquired this item together with the item that you are currently checking out.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Installation on car

SPECIFICATIONS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

The below item additionally pairs truly well with the item being reviewed.

Bulkhead Tie Bars, Front & Rea

These are the Front and Rear Bulkhead Tie Bars for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Aluminum building
Blue in color

CONSISTS OF:
One Front Bulkhead Tie Bar
One Rear Bulkhead Tie Bar
One 2.5x6mm Cap Head Screw

REQUIRES:
Installation on the car

This is a great enhancement to the item currently being reviewed.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be used in any car where this size bearing is needed

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Installation on the car

SPECIFICATIONS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

This item compliments the main item below.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

CONSISTS OF:
2 Ball Bearings

REQUIRES:
Installation on the car

SPECIFICATIONS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")