Traxxas Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction
Silver in color

INCLUDES:
Two 2x46mm Pins
4 2x14mm Pins

NEEDS:
Installation through suspension components

Below is a wonderful item that numerous others have actually bought at the same time.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Skidplate
One Back Skidplate
One Transmission Skid Plate
Two Guiding Servo Guards
One Steering Servo Cover Plate

NEEDS:
Installation on the vehicle

This item praises the main item here.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

NEEDS:
Installation over front diff assembly

This is a amazing addition to the item presently being reviewed.

Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Mounts
4 2.5x18mm Cap Head Screws

NEEDS:
Installation on the vehicle

Below is a wonderful item that numerous others have actually bought at the same time.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

NEEDS:
Installation on the vehicle

Many others have actually acquired this item together with the item that you are presently checking out.

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Grey in color

INCLUDES:
One Chassis

NEEDS:
Installation on vehicle

SPECIFICATIONS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

The listed below item likewise pairs truly well with the item being reviewed.

Bulkhead Tie Bars, Front & Rea

These are the Front and Back Bulkhead Tie Bars for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Aluminum building and construction
Blue in color

INCLUDES:
One Front Bulkhead Tie Bar
One Back Bulkhead Tie Bar
One 2.5x6mm Cap Head Screw

NEEDS:
Installation on the vehicle

This is a amazing addition to the item presently being reviewed.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May likewise be used in any vehicle where this size bearing is needed

INCLUDES:
Two Ball Bearings

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

This item praises the main item here.

Ball Bearings, Blue Rubber Sea

These are the 8x12mm Blue Rubber Sealed Ball Bearings for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Ball bearings
Blue rubber sealed

INCLUDES:
Two Ball Bearings

NEEDS:
Installation on the vehicle

SPECIFICATIONS:
Outer Size: 12mm (0.47")
Inner Size: 8mm (0.31")
Width: 3.5mm (0.14")