Traxxas Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made of stainless steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Also called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Often gotten with the product that you are currently reviewing.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building

INCLUDES:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Want an additional fantastic product to match the above discussed product?

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These blocks mount to the front A-arms and is exactly what the
steering knuckles connect to.

FEATURES:
Nylon construction, black in color
Stamped right and delegated insure correct installation

INCLUDES:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly in between A-arms and steering knuckles

Want an additional fantastic product to match the above discussed product?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a fantastic product that lots of others have actually bought at the very same time.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Guiding Blocks
for the Traxxas Outlaw, Stampede and Rustler VXL series.

FEATURES:
Plastic construction
Black in color

INCLUDES:
One left and right steering blocks

NEEDS:
5x11x4mm bearings (DTXC1547)

Here is a fantastic product that lots of others have actually bought at the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon construction

INCLUDES:
2 Front bearing (center) providers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if needed usage (2) DTXC1547.

This product is frequently gotten with the above discussed product.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are built of chrome-plated steel and used to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins

The below product likewise sets actually well with the product being gone over.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Safeguards the Chassis.

FEATURES:
Resilient Plastic Building
Black in Color

INCLUDES:
One Bumper
One Team RPM Decal

NEEDS:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This product is frequently gotten with the above discussed product.

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

This product is frequently gotten with the above discussed product.

Large Servo Saver

This is a big servo saver that can be used in Traxxas automobiles or any car that
requires a big design servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to mount the saver
on a lot of popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.