Traxxas Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made from stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Regularly purchased with the thing that you are presently reviewing.

Caster Blocks 30 Degree (L&R) Slash / Stampede / Rustler

These are Castor Blocks for the Traxxas
Rustler and Stampede.

FEATURES:
Black Plastic Building and construction

CONSISTS OF:
2 Blocks

NEEDS:
Traxxas Rustler or Stampede

Want one more excellent thing to enhance the above mentioned thing?

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs install to the front A-arms and is what the
guiding knuckles attach to.

FEATURES:
Nylon building and construction, black in color
Stamped right and delegated guarantee proper installation

CONSISTS OF:
2 RPM 30° Front Caster Blocks

NEEDS:
Assembly between A-arms and guiding knuckles

Want one more excellent thing to enhance the above mentioned thing?

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a excellent thing that lots of others have purchased the same time.

Steering Blocks L&R Slash/ Rustler/Stampede/Bandit

These are the Left and Right Steering Blocks
for the Traxxas Bandit, Stampede and Rustler VXL series.

FEATURES:
Plastic building and construction
Black in color

CONSISTS OF:
One left and ideal steering obstructs

NEEDS:
5x11x4mm bearings (DTXC1547)

Here is a excellent thing that lots of others have purchased the same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Carriers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

CONSISTS OF:
2 Front bearing (center) carriers
2 RPM decals

NEEDS:
(4) 5x11mm bearings, if required use (2) DTXC1547.

This thing is frequently purchased with the above mentioned thing.

Screw Pin Set (R)

This is the replacement screw pin (or hinge pins) for the Traxxas Stampede
and Rustler trucks. They are constructed of chrome-plated steel and utilized to
hold the suspension arms to the chassis and the hubs.

PACKAGE
INCLUDE:
2 3mm x 46mm screw pins
2 3mm x 40mm screw pins
2 3mm x 29mm screw pins
2 2mm x 27mm screw pins
2 2mm x 24mm screw pins

The below thing also pairs actually well with the thing being discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Protects the Chassis.

FEATURES:
Long lasting Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

NEEDS:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This thing is frequently purchased with the above mentioned thing.

CNC Mach Alum Caster Blocks Stampede/Rustler/Sl

This thing is frequently purchased with the above mentioned thing.

Large Servo Saver

This is a large servo saver that can be utilized in Traxxas automobiles or any car that
requires a large style servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that enable you to install the saver
on many popular servos consisting of: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the guiding linkages.