Traxxas Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
2 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

This thing praises the above reviewed thing.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in place
Gray in color, built of hardened plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Attaching to skidplate and differential

COMMENTS:
For the 3.3 version only.

This thing praises the main item right here.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild set for 2 Traxxas black plastic shocks. Includes:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

You will certainly love this thing if you have the thing just above discussed.

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FEATURES:
Helps to support axle carriers and shocks
Black in color, built of hardened plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Attaching to chassis

COMMENTS:
For the 3.3 version only. For the initial T-Maxx Lower Suspension
    Arms, order TRAC5132.

Here is another thing that praises the thing being reviewed.

A-Arms, For Maxx, 2.5R & 3.3, Blue

These are the RPM Blue A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that replace the stock.

FEATURES:
Blue in color
Plastic construction

CONSISTS OF:
(1) Upper Arm
(1) Lower Arm
(2) RPM Decals

NEEDS:
Setup, NOTE-four bundles are required to replace all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

This is a amazing enhancement to the thing presently being reviewed.

Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Monster Truck.
This skidplate bolts to the Chassis (essential #4922) and the Bulkheads essential #4930
and supplies protection to the front differential.

FEATURES:
Skidplate is built of high impact molded black plastic.
Front of skidplate kicks up at about 45 degrees to shield the
    differential from crash damage or difficult landings from jumps.
Stainless steel installing plate supplies stiff installing surface.

INCLUDES:
One plastic front skidplate
One stainless steel installing plate.

REQUIRES:
Installing on chassis with four 3x10mm countersunk maker screws
    (not included, use TRAC3277).

Here is a terrific thing that several others have actually bought at the same time.

3 X 15Mm Counter Hex Screw (6)

This is a package of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Utilized on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm countersunk screw is required

CONSISTS OF:
6 3x15mm Traxxas Countersunk Hex Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Get this thing to enhance the one you read about.

Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FEATURES:
Fastens to bulkhead and helps to support axle carriers
Black in color, built of hardened plastic

CONSISTS OF:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Attaching to chassis

COMMENTS:
For the 3.3 version only.