Traxxas Susp Arms (Upr) (2) Maxx

These are the Upper Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Fastens to bulkhead and helps to support axle providers
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Upper Suspension Arm for the T-Maxx 3.3

NEEDS:
Attaching to chassis

REMARKS:
For the 3.3 variation just.

Want another fantastic item to compliment the above mentioned item?

Susp Arms (Lwr) (2) Maxx

These are the Lower Suspension Arms for the T-Maxx 3.3.

FUNCTIONS:
Helps to support axle providers and shocks
Black in color, built of solidified plastic

CONSISTS OF:
One Right and one Left Lower Suspension Arm for the T-Maxx 3.3

NEEDS:
Attaching to chassis

REMARKS:
For the 3.3 variation just. For the original T-Maxx Lower Suspension
    Arms, order TRAC5132.

Right here is another item that praises the item being talked about.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Steel building and construction
Silver in color

CONSISTS OF:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Right here is another item that praises the item being talked about.

Pivot Ball Caps & Dust Boots

This is the replacement Pivot Ball and Dust Cap Boot Set
    for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles.

FEATURES:
Nylon and Rubber Building and construction
Blue and Black in Color

CONSISTS OF:
4 Blue Rubber Pivot Ball Boots
4 Black Dust Boot Retainer
4 Blue Notched Dust Boot Retainer
4 Blue Rubber Boot Plugs
4 nylon Pivot Ball Retainers
Direction sheet

NEEDS:
Two bundles needed to complete truck

This item is often acquired with the above mentioned item.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural sleek color

CONSISTS OF:
Twelve Body Clips

SPECS:
Length: 26mm

Right here is a fantastic item that several others have bought at the very same time.

Pivot Balls W/Cap

These are the Pivot Balls and Pivot Ball Cap Bushings for the
Traxxas T-Maxx and E-Maxx 4WD Radio Control Beast Trucks.
Two of these pivot balls fit into the axle providers at each wheel
    The pivot ball cap bushings fit between the pivot balls
and the aluminum caps.

FEATURES:
Changes stock pivot balls and pivot ball cap bushings.
Pivot balls are made from steel, pivot ball cap bushings are made from
    plastic.

INCLUDES:
4 pivot balls.
Four pivot ball cap bushings

NEEDS:
Threading the pivot balls through the axle providers and into the
    suspension arms. Putting pivot ball cap bushings between the pivot
    balls and aluminum caps.

The below item additionally sets truly well with the item being talked about.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building and construction

CONSISTS OF:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

NEEDS:
Other shock elements

SPECS:
Size Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Right here is a fantastic item that several others have bought at the very same time.

Axle Carriers Use Larger 6 X 1

These are the Optional Axle Carriers L & R for
usage on the Traxxas Revo series.

FEATURES:
Nylon Building and construction
Black in Color
Allows for Oversized Bearing use

CONSISTS OF:
One Left Axle Provider
One Right Axle Provider
4 Dust Boot Retainers
Two Bearing Spacers

NEEDS:
Setup