Traxxas Stub Axles Rear (2)

These are the Rear Stub Axles
for the Traxxas Bandit, Stampede and Rustler.

FEATURES:
Metal building, black and silver in color

INCLUDES:
Two rear stub axles and pins

SPECIFICATIONS:
Length: 1.65" (42mm)
Size: .51" (13mm) at biggest point

Here is an additional thing that praises the thing being reviewed.

Half Shafts Long Truck (2)

This is a set of telescoping drive shafts for the Blue Eagle LS II.

Includes: 2 white nylon telescoping shaft (each shaft is made from two pieces)
4 aluminum U-joints

pcd 01/23/94

Here is an additional thing that praises the thing being reviewed.

Half Shafts Long Truck (6)

This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones
or swing shafts). These are for usage on Traxxas trucks.

Features: White plastic parts

Includes:
(6) sets of drive shafts (each set includes an inside shaft wich
slides in the outside shaft).

Dimensions: 2.5" long when fully compressed.

Requires: Nothing else needed

This thing is regularly gotten with the above mentioned thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Here is a excellent thing that numerous others have actually purchased the same time.

Caster Blocks, For Traxxas Electric Slash, Stampede, Rustler, Ni

These are RPM 30° Front Caster Blocks for the Traxxas
Electric Stampede and Rustler.
These obstructs mount to the front A-arms and is exactly what the
steering knuckles attach to.

FEATURES:
Nylon building, black in color
Stamped right and delegated guarantee appropriate setup

INCLUDES:
Two RPM 30° Front Caster Blocks

REQUIRES:
Assembly between A-arms and steering knuckles

The listed below thing likewise sets truly well with the thing being reviewed.



This is the ST Racing Silver Aluminum Back Center Provider
for the Traxxas Slash 2WD, Stampede, Rustler and Bandit.

FEATURES:
Silver in color

INCLUDES:
One Silver Aluminum Back Center Provider

Here is a excellent thing that numerous others have actually purchased the same time.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock containing the shock oil.

FEATURES:
Nylon building

INCLUDES:
Two nylon shock cap (tops)
Two nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECIFICATIONS:
Size Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

Many others have actually gotten this thing in addition to the thing that you are currently reviewing.

Stub Axle Carriers (2) (R & S)

This is the Traxxas #3652 Stub Axle Provider that comes consisted of with
the Rustler and Stampede trucks.

FEATURES:
Made from a black plastic/nylon material.
Also called the rear center or center carrier.
Has 2 possible mount places for the outer hinge pin shaft.

INCLUDES.
2 Stub alxe carriers.

COMMENTS:
This holds the two 5x8mm bushings (or bearings) on the stub
axle likewise called the wheel shaft.

AXY
3/25/95

Here is a excellent thing that numerous others have actually purchased the same time.

Diff Output Yokes Bk (2) W/3X5mm Cntrsnk Screws (2 ) &

These are the Differential Output Yokes
for the Traxxas Bandit, Stampede and Rustler VXL.

FEATURES:
Black plastic building

INCLUDES:
Two differntial output yokes
Two 3x5mm countersunk screws
Two screw pins

REQUIRES:
Installation

SPECIFICATIONS:
Length: .70" (18mm)
Size: .51" (13mm)