Traxxas Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building
Black in color

INCLUDES:
Two steering blocks

REQUIRES:
Installation on guiding assembly

SPECIFICATIONS:
Length: 35mm (1.38")
Width: 32mm (1.26")

You will certainly like this product if you have the product above pointed out.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building
Black in color

INCLUDES:
One left caster block
One right caster block

REQUIRES:
Installation on Slash

SPECIFICATIONS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

Get this item to enhance the one you are reading around.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want one more fantastic item to compliment the above mentioned item?

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Protected with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to car

SPECIFICATIONS:
Inner Size: 10mm
Outer Size: 15mm
Side Density: 4mm

REMARKS:
These bearings are used to support the Primary Clutch (one required).

Frequently acquired with the item that you are currently reading about.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Front driveshaft assembly
Screw pin

REQUIRES:
Installation on car

Right here is one more item that compliments the item being reviewed.

Stub Axle Housing (2)

These are the axle real estates (or hub providers) used on the: Rad 2, Hawk 2,
Eagle, Blue Eagle LS II and Nitro Rustler. The real estates are molded of
black nylon.

Includes: 2 axle real estates

pcd 01/23/94

Right here is a fantastic item that many others have actually bought at the very same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on car

The below item additionally sets truly well with the item being reviewed.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas cars
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building

INCLUDES:
Two hex hubs
4 axle pins

REQUIRES:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Density: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These hubs might be used with other cars using the same
    pin/hex design. These hubs Will Not work on the T-Maxx or E-Maxx.

This item is often acquired with the above mentioned item.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Installation on the car

This item is often acquired with the above mentioned item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and direction
    sheet

REQUIRES:
Installation on the car