Traxxas Steering Blocks, Left & Right

These are the Steering Blocks for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

INCLUDES:
2 steering blocks

NEEDS:
Setup on guiding assembly

SPECS:
Length: 35mm (1.38")
Width: 32mm (1.26")

You will love this thing if you have the thing earlier pointed out.

Caster Blocks (C-Hubs), Left &

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4.

FEATURES:
Hardened plastic building and construction
Black in color

INCLUDES:
One left caster block
One right caster block

NEEDS:
Setup on Slash

SPECS:
Length: 49mm (1.93")
Width: 29.5mm (1.16")

Get this thing to improve the one you read around.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want one more excellent thing to enhance the above mentioned thing?

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Construction
Shielded with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to car

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one required).

Frequently purchased with the thing that you are currently reviewing.

Driveshaft Assembly Front Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
Front driveshaft assembly
Screw pin

NEEDS:
Setup on car

Below is one more thing that compliments the thing being reviewed.

Stub Axle Housing (2)

These are the axle housings (or center providers) utilized on the: Rad 2, Hawk 2,
Eagle, Blue Eagle LS II and Nitro Rustler. The housings are molded of
black nylon.

Includes: 2 axle housings

pcd 01/23/94

Below is a excellent thing that numerous others have purchased the very same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

The below thing likewise pairs truly well with the thing being reviewed.

Hex Hubs Blue Alum (2) Slash

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas automobiles
such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

FEATURES:
Blue aluminum building and construction

INCLUDES:
2 hex centers
Four axle pins

NEEDS:
Assembly onto axles.

SPECS:
Hex Length: 12mm (.47")
Hex Thickness: 6.1mm (.24")
Axle Pin Length: 9.6mm (.38")

REMARKS:
These centers might be utilized with other automobiles making use of the same
    pin/hex design. These centers Will Not work on the T-Maxx or E-Maxx.

This thing is frequently purchased with the above mentioned thing.

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the car

This thing is frequently purchased with the above mentioned thing.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the car