Traxxas Steering Arm (Upper & Lower)/

This is the Steering Arm for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
Two Ball Studs
Front and Rear Shock Installs
4 2.5x18mm Cap Head Screws

REQUIRES:
Setup on the automobile

Below is a wonderful item that lots of others have bought at the same time.

Bulkhead, Front (Left & Right

This is the Front Bulkhead for usage on the
Traxxas 1/16 scale E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two front bulkhead halves
4 3x10mm Button Head Screws
One 2.5x23mm Cap Screw

REQUIRES:
Setup over front diff assembly

This item compliments the above discussed item.

Skidplate Set, Front (1)/ Rear

This is the Skid Plate Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Skidplate
One Rear Skidplate
One Transmission Skid Plate
Two Steering Servo Guards
One Steering Servo Cover Plate

REQUIRES:
Setup on the automobile

Want one more wonderful item to enhance the above stated item?

Chassis, 1/16 E-Revo/Slash

This is the Chassis for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building and construction
Grey in color

CONSISTS OF:
One Chassis

REQUIRES:
Setup on automobile

SPECIFICATIONS:
Length: 245mm (9.6")
Width: 107mm (4.2")
Height: 40mm (1.6")

This item compliments the above discussed item.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Setup on the automobile

Below is a wonderful item that lots of others have bought at the same time.

Suspension Pin Set (Front Or R

This is the Suspension Pin Set for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction
Silver in color

CONSISTS OF:
Two 2x46mm Pins
4 2x14mm Pins

REQUIRES:
Setup through suspension parts

Get this item to enhance the one you are reading around.

Servo, Micro, Waterproof

This is the Waterproof Micro Servo for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Waterproof
Blue nylon case

CONSISTS OF:
One Waterproof Micro Servo with basic adapter

REQUIRES:
Setup on the automobile

SPECIFICATIONS:
Length: 29.5mm (1.2")
Width: 14mm (0.55")
Height: 29mm (1.1")

This item is regularly bought with the above stated item.



WATERPROOF DIGITAL MICRO SERVO .11/69@6V SUITABLE FOR TRAXXAS 1/16

Want one more wonderful item to enhance the above stated item?



This is the Parallel Battery Connection Wire Harness for usage
on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Traxxas High Power Connectors
Integrates mAh of connected batteries for longer run time

CONSISTS OF:
One Wire Harness (two Traxxas Male adapters and one Traxxas female
    adapter)
User's manual

REQUIRES:
Setup in between batteries and ESC

This is a fantastic enhancement to the item presently being discussed.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for usage with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Compatible with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

CONSISTS OF:
TQ 2.4GHz 3-Channel Micro Receiver

SPECIFICATIONS:
Measurements: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)