Traxxas Stampede 4X4 Stub Axles Rear Heavy Duty

These are the Rear Heavy Duty Stub Axles for the Slash 4x4 from Traxxas

FUNCTIONS:
Aluminum building

CONSISTS OF:
2 rear stub axles
2 pins

NEEDS:
Setup on automobile

JMLM 3/9/11

This item compliments the main item right here.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Heavy Duty Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic building

CONSISTS OF:
2 Ouput Yokes
2 Screw Pins

This is a amazing enhancement to the item presently being gone over.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want another terrific item to match the above pointed out item?

Stub Axles Front Heavy Duty Stampede 4X4

This is the Front Heavy Duty Stub Axles for the Stampede 4x4 from Traxxas

FUNCTIONS:
Plastic and steel building

CONSISTS OF:
2 Stub axles

NEEDS:
Setup on automobile

This item is often gotten with the above pointed out item.

Bumper, Rear/ Bumper Mount, Re

This is the Rear Bumper and Mount for the Traxxas Slash 4x4.

FUNCTIONS:
Solidified plastic building
Black in color

CONSISTS OF:
One rear bumber
One rear bumper install

NEEDS:
Setup on chassis

Want another terrific item to match the above pointed out item?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outside diameter: 7mm

This is a amazing enhancement to the item presently being gone over.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

NEEDS:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Likewise available in Blue (RPMC0705)

Want another terrific item to match the above pointed out item?

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon building
Replaces a worn or broken bellcrank set
May likewise be installed on the Traxxas Rustler, Bandit and 2WD Slash
    models (put together in various configurations depending upon model)

CONSISTS OF:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Maker Screws
Two Hollow Balls
4 Bushings
Direction Sheet

NEEDS:
Assembly and setup following the model handbook and suched as
guideline sheet

This item compliments the main item right here.

Half Shafts Heavy Duty Stampede 4X4

This is the Heavy Duty Half Shaft Set for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
2 external splined half shafts
2 internal splined half shafts
4 metal u-joints

NEEDS:
Setup on automobile

This item compliments the above gone over item.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, covered
Anodized black with white springs
Entirely put together

CONSISTS OF:
4 fully put together shocks with white springs
Installing hardware
One bottle of silicone oil

NEEDS:
Filling shocks with shock oil and assembling onto the model