Traxxas Stampede 4X4 Stub Axles Rear Heavy Duty

These are the Back Strong Stub Axles for the Slash 4x4 from Traxxas

FEATURES:
Aluminum building and construction

INCLUDES:
2 rear stub axles
2 pins

REQUIRES:
Setup on automobile

JMLM 3/9/11

This thing compliments the main item here.

Diff Output Yokes Heavy Duty (2) Stampede 4X4

These are the Traxxas Strong Differential Output Yokes.

FEATURES:
Fits the Traxxas Stampede 4x4, Telluride 4x4, Slash 2WD

Black plastic building and construction

INCLUDES:
2 Ouput Yokes
2 Screw Pins

This is a wonderful enhancement to the thing presently being talked about.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

Want another excellent thing to enhance the above discussed thing?

Stub Axles Front Heavy Duty Stampede 4X4

This is the Front Strong Stub Axles for the Stampede 4x4 from Traxxas

FEATURES:
Plastic and steel building and construction

INCLUDES:
2 Stub axles

REQUIRES:
Setup on automobile

This thing is frequently acquired with the above discussed thing.

Bumper, Rear/ Bumper Mount, Re

This is the Back Bumper and Mount for the Traxxas Slash 4x4.

FEATURES:
Solidified plastic building and construction
Black in color

INCLUDES:
One back bumber
One rear bumper mount

REQUIRES:
Setup on chassis

Want another excellent thing to enhance the above discussed thing?

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

INCLUDES:
Eiqht 4mm flanged nylon locking nuts

SPECIFICATIONS:
Outside size: 7mm

This is a wonderful enhancement to the thing presently being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Thickness: 0.31" (8mm)

COMMENTS:
Also available in Blue (RPMC0705)

Want another excellent thing to enhance the above discussed thing?

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FEATURES:
Composite nylon building and construction
Changes a worn or damaged bellcrank set
May also be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    designs (put together in various configurations depending on design)

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
2 Servo Arms
2 Shoulder Screws
2 3x15 Counter Sunk Machine Screws
2 Hollow Balls
Four Bushings
Guideline Sheet

REQUIRES:
Assembly and installation following the design manual and included
instruction sheet

This thing compliments the main item here.

Half Shafts Heavy Duty Stampede 4X4

This is the Strong Half Shaft Set for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
2 external splined half shafts
2 internal splined half shafts
4 metal u-joints

REQUIRES:
Setup on automobile

This thing compliments the above talked about thing.

Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building and construction, layered
Anodized black with white springs
Totally put together

INCLUDES:
Four fully put together shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the design