Traxxas Stampede 4X4 Hold Down Battery Clip

This is the optional Battery Hold Down for the Traxxas Stampede 4x4 VXL.

FEATURES:
Composite building
Enables setup of taller multi-cell batteries

INCLUDES:
Battery Hold Down with metal Post and Body Clip

REQUIRES:
Securing to chassis

COMMENTS:
For stock battery holder, order TRAC6730.

This thing compliments the main item right here.



This is the DuraTrax Onyx 11.1V 5000mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/10 scale automobile applications
Prewired with Traxxas high current adapter

INCLUDES:
11.1V 5000mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Score: 11.1V
Ranked Capability: 5000mAh
Discharge Score: 25C constant
Dimensions: 1.7 x 1.2 x 5.4" (43 x 31 x 137mm)
Weight: 13.5oz (383g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 56Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Battery charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or modify pack electrical wiring in any way or leak cells
NEVER place on combustible materials or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm