Traxxas Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Several others have actually acquired this product together with the product that you are presently reviewing.

Spur Gear (83T) 48P

This is a 48P, 83T Spur Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Designed for designs with a slipper clutch.
Black plastic building

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

Want one more great product to compliment the above mentioned product?

23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FEATURES:
Pinion gear with set screw, Silver in color

CONSISTS OF:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

NEEDS:
Installation

SPECS:
Outer Size: 14mm (9/16")
Inner Size: 11mm (7/16")

This product is often acquired with the above mentioned product.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Designed for designs with a slipper clutch
Black plastic building

CONSISTS OF:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).

The below product additionally pairs actually well with the product being gone over.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel building
_
Roll pin pre-installed

CONSISTS OF:
One slipper clutch set

SPECS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

REMARKS:
This part will fit both the standard and XL variation of the Rustler
or Stampede.

This product praises the above gone over product.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building

CONSISTS OF:
One Steel Disc
Three Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Directions

NEEDS:
Disassembly of slipper clutch

This is a great addition to the product presently being gone over.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Hub
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Building
Silver in Color

CONSISTS OF:
One Slipper Press Plate
One Slipper Press Plate Hub

NEEDS:
Assembly onto Automobile

Here is a great product that lots of others have actually purchased the exact same time.

Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Functions: Brass pinion gear

Consists of: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" General length- 7/16"
    Shaft size- 1/4" Gear size- 1/2"
    Mounting shaft (motor shaft) 1/8"