Traxxas Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Created for designs with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 76

REMARKS:
For this slipper clutch design there is also a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This is a superb enhancement to the product currently being reviewed.

Spur Gear (83T) 48P

This is a 48P, 83T Stimulate Gear for designs with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
83 tooth
Created for designs with a slipper clutch.
Black plastic construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 83

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    86T gear (TRAC4686) and 90T gear (TRAC4690).

Get this product to boost the one you read about.

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel construction, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outside Size: .69" (17.5mm)

Many others have actually bought this product along with the product that you are currently reading about.

Shaft Slipper Clutch

This is a Slipper Clutch Shaft for the Traxxas Rustler XL
and Stampede XL.

FEATURES:
Steel construction
_
Roll pin pre-installed

INCLUDES:
One slipper clutch set

SPECIFICATIONS:
Length: 1.98" (50mm)
Size: .21" ( 5mm)

REMARKS:
This part will fit both the standard and XL version of the Rustler
or Stampede.

Right here is an additional product that praises the product being reviewed.

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel construction

INCLUDES:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

Get this product to boost the one you read about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Want an additional terrific product to match the above pointed out product?

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

REMARKS:
These may also be referred to as coverplate screws.

This product is often bought with the above pointed out product.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Hub
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Building
Silver in Color

INCLUDES:
One Slipper Press Plate
One Slipper Press Plate Hub

NEEDS:
Assembly onto Car

This product praises the above reviewed product.

Traxxas Female Connector Set (2)

These are the Female Traxxas Connectors Plugs Just (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity security makes it difficult to connect backwards
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Secure, favorable locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
Two black female plastic connectors
Two sets of gold metal pins
Instruction sheet

NEEDS:
Soldering wires to the metal pins