Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 68T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECS:
Size: 2.16" (55mm)
Thickness: .23" (6mm)

The listed below product also sets actually well with the product being discussed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum construction

INCLUDES:
One slipper pressure plate
One slipper hub

NEEDS:
Setup onto vehicle.

Here is a excellent product that many others have bought at the same time.

Rebuild Kit Hd Slipper Clutch

This is the Heavy Duty Slipper Clutch Rebuild Set from Traxxas.

FEATURES:
Elements for both nitro and electrical Revo and Maxx trucks

INCLUDES:
Two Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

NEEDS:
Disassembly of slipper clutch

Here is another product that praises the product being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above discussed product.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal construction

INCLUDES:
Two different plasting holders
One disk-shaped magnet
Two 8mm screws
Two 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet density: 2mm

You will love this thing if you have the thing just above discussed.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might also be referred to as coverplate screws.

Here is a excellent product that many others have bought at the same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon construction
Black in color
.8 metric pitch

INCLUDES:
One 56T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto vehicle

This product praises the main item below.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Gear
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon construction
Black in color
.8 Module pitch

INCLUDES:
One 58T 0.8 Pitch Spur Gear

NEEDS:
Assembly onto vehicle

Get this product to boost the one you are reading about.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black in color
.8 metric pitch

INCLUDES:
One 65T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

Here is another product that praises the product being discussed.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel centers fit on completion of the stub axles.

FEATURES:
Replaces missing or harmed hex wheel centers
Centers are made of molded black plastic
Axle pins are steel

INCLUDES:
Two Hex Wheel Centers
Two 2.5x12mm axle pins

NEEDS:
Inserting pins through stub axles (4953) and placing wheel centers in
    recessed area of axle providers (4932).