Traxxas Spur Gear 68T 0.8 Pitch

This is the optional .8 Metric Pitch 68 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 68T 0.8 metric pitch spur equipment

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2.16" (55mm)
Density: .23" (6mm)

The below item also pairs actually well with the item being gone over.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Center for the Revo.
These belong to the slipper assembly.

FEATURES:
Aluminum building and construction

SUCHES AS:
One slipper pressure plate
One slipper center

REQUIRES:
Setup onto vehicle.

Here is a terrific item that several others have actually bought at the exact same time.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Package from Traxxas.

FEATURES:
Elements for both nitro and electric Revo and Maxx trucks

SUCHES AS:
Three Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Recommendations

REQUIRES:
Disassembly of slipper clutch

Here is another item that compliments the item being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above gone over item.

Telemtry Trigger Magnet Holder Spur Gear/Magnet

These are the Traxxas Telemetry Trigger Magnet Holders,
Spur Gear/Telemetry Trigger Magnet

FEATURES:
Black plastic and metal building and construction

SUCHES AS:
2 various plasting holders
One disk-shaped magnet
Three 8mm screws
Three 10mm screws

SPECS:
Magnet diameter: 5mm
Magnet density: 2mm

You will enjoy this item if you have the item just above discussed.

3 X 6Mm Cap Hex Screws (6)

These are 3x5mm Backplate screws for the Traxxas 2.5 Engine.

FEATURES:
Black steel construction.

INCLUDES:
Six black steel cap head screws.

REQUIRES:
Assembly on coverplate.

SPECS:
Length: 5mm
Size: 3mm

COMMENTS:
These might also be referred to as coverplate screws.

Here is a terrific item that several others have actually bought at the exact same time.

56T 0.8 P Spur Gear

This is the 56 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color
.8 metric pitch

SUCHES AS:
One 56T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto vehicle

This item compliments the main item right here.

58T 0.8 P Spur Gear

This is the 58 Tooth Spur Equipment
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color
.8 Module pitch

SUCHES AS:
One 58T 0.8 Pitch Spur Equipment

REQUIRES:
Assembly onto vehicle

Get this item to boost the one you read around.

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Equipment
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

SUCHES AS:
One 65T 0.8 metric pitch spur equipment

REQUIRES:
Setup on the vehicle

SPECS:
Size: 2.12" (54mm)
Density: .23" (6mm)

Here is another item that compliments the item being gone over.

Hex Wheel Hubs

This is the Set of Hex Wheel Centers for the Traxxas T-Maxx 4WD RTR Beast Truck.
These wheel hubs fit on the end of the stub axles.

FEATURES:
Changes missing out on or harmed hex wheel hubs
Centers are made of molded black plastic
Axle pins are steel

SUCHES AS:
2 Hex Wheel Centers
2 2.5x12mm axle pins

REQUIRES:
Placing pins through stub axles (4953) and placing wheel hubs in
    recessed location of axle carriers (4932).