Traxxas Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 62T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECIFICATIONS:
Size: 2" (51mm)
Thickness: .23" (6mm)

Right here is another item that compliments the item being talked about.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electrical Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, 2 Locknuts, 2x9.8mm Pin, 2
    Locknuts, Spring, 2 Spring Washers and Instructions

NEEDS:
Disassembly of slipper clutch

This item compliments the above talked about item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will love this thing if you have the thing previously stated.

Hub Carriers

These are the Hub Carriers for the
    Associated ProLite 4x4 Brief Course Truck, ASCD71**.

FEATURES:
Plastic building and construction

CONSISTS OF:
2 Hub Carriers

NEEDS:
Four 3/16 x 3/8" ball bearings, DTXC1423

Right here is a terrific item that numerous others have actually purchased the same time.

17-T Pinion Gear Compatible With 32-Pitch

This is the Traxxas 17 Tooth 32 Pitch Pinion Gear.

FEATURES:
Solidified steel building and construction
0.8 metric pitch, suitable with 32 pitch spur gears
Fits 0.196" (5mm) diameter motor shafts

CONSISTS OF:
17 Tooth 32 Pitch Pinion Gear with Set Screw

This item compliments the main item below.



These are the Ball Cups for the
    Associated ProLite 4x4 Brief Course Truck, ASCD71**.

FEATURES:
Plastic building and construction
Threads onto and anchors suspension and steering linkages

CONSISTS OF:
Fourteen Ball Cups

Get this item to improve the one you are reading around.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

Right here is another item that compliments the item being talked about.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These become part of the slipper assembly.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One slipper pressure plate
One slipper center

NEEDS:
Setup onto car.

Want another terrific item to compliment the above pointed out item?

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur gear

NEEDS:
Setup on the car

SPECIFICATIONS:
Size: 2.12" (54mm)
Thickness: .23" (6mm)

This item compliments the above talked about item.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black in color
Replaces worn or damaged lower chassis braces

CONSISTS OF:
Right and left lower chassis braces

NEEDS:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Thickness: .43" (11mm)

This item compliments the above talked about item.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Replaces broken receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.