Traxxas Spur Gear 62T 0.8 Pitch

This is the optional .8 Metric Pitch 62 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
.8 metric pitch

CONSISTS OF:
One 62T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Diameter: 2" (51mm)
Density: .23" (6mm)

Here is an additional product that compliments the product being reviewed.

Rebuild Kit Hd Slipper Clutch

This is the Sturdy Slipper Clutch Rebuild Kit from Traxxas.

FEATURES:
Components for both nitro and electric Revo and Maxx trucks

CONSISTS OF:
3 Pads, steel Slipper Disc, two Locknuts, 2x9.8mm Pin, two
    Locknuts, Spring, two Spring Washers and Recommendations

NEEDS:
Disassembly of slipper clutch

This product compliments the above reviewed product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

You will certainly like this product if you have the product earlier pointed out.

Hub Carriers

These are the Hub Carriers for the
    Associated ProLite 4x4 Brief Course Truck, ASCD71**.

FUNCTIONS:
Plastic building

CONSISTS OF:
Two Hub Carriers

NEEDS:
4 3/16 x 3/8" ball bearings, DTXC1423

Here is a fantastic product that many others have actually purchased the very same time.

17-T Pinion Gear Compatible With 32-Pitch

This is the Traxxas 17 Tooth 32 Pitch Pinion Gear.

FEATURES:
Hardened steel building
0.8 metric pitch, compatible with 32 pitch spur gears
Fits 0.196" (5mm) diameter motor shafts

CONSISTS OF:
17 Tooth 32 Pitch Pinion Gear with Set Screw

This product compliments the main item below.



These are the Ball Cups for the
    Associated ProLite 4x4 Brief Course Truck, ASCD71**.

FUNCTIONS:
Plastic building
Threads onto and anchors suspension and guiding linkages

CONSISTS OF:
Fourteen Ball Cups

Get this product to enhance the one you are reading about.

Cover, Gear Upper & Lower-Use W/Motor Plate Tra3977x

Here is an additional product that compliments the product being reviewed.

Slipper Pressure Plate & Hub Revo

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.
These are part of the slipper assembly.

FEATURES:
Aluminum building

CONSISTS OF:
One slipper pressure plate
One slipper hub

NEEDS:
Setup onto vehicle.

Want an additional fantastic product to compliment the above discussed product?

Spur Gear 65T 0.8 Pitch

This is the optional .8 Metric Pitch 65 Tooth Spur Gear
for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
.8 metric pitch

CONSISTS OF:
One 65T 0.8 metric pitch spur gear

NEEDS:
Setup on the vehicle

SPECIFICATIONS:
Diameter: 2.12" (54mm)
Density: .23" (6mm)

This product compliments the above reviewed product.

Chassis Braces, Lower (Black)

This is the Lower Chassis Brace for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black in color
Replaces used or damaged lower chassis braces

CONSISTS OF:
Right and left lower chassis braces

NEEDS:
Setup on the E-Maxx

SPECIFICATIONS:
Length: 9.44" (240mm)
Width: 1.57" (40mm)
Density: .43" (11mm)

This product compliments the above reviewed product.

Box, Receiver Sealed W/Silicon

This is the Receiver Box for the Traxxas E-Maxx Truck.

FEATURES:
Replaces damaged receiver boxes
Constructed of black plastic

CONSISTS OF:
One top and bottom half receiver box for the Traxxas E-Maxx
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.