Traxxas Spur Gear 45T Vxl

This is the 45T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One 45T Spur Gear

NEEDS:
Setup on the car

SPECIFICATIONS:
Outer Diameter: 24.75mm (0.97")
Inner Diameter: 5.5mm (0.22")
Width: 7mm (0.28")

You will certainly enjoy this thing if you have the thing earlier stated.

Spur Gear 50T Vxl

This is the optional 50T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One 50T Spur Gear

NEEDS:
Setup on the car

SPECIFICATIONS:
Outer Diameter: 27.4mm (1.1")
Inner Diameter: 5.5mm (0.22")

Here is a wonderful product that several others have actually bought at the same time.

Spur Gear 55T

This is the optional 55T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One 55T Spur Gear

NEEDS:
Setup on the car

SPECIFICATIONS:
Outer Diameter: 30mm (1.2")
Inner Diameter: 5.5mm (0.22")
Width: 7.2mm (0.28")

Want an additional wonderful product to enhance the above stated product?

31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

CONSISTS OF:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

NEEDS:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Diameter: 1/8"
Outdoors Diameter: .69" (17.5mm)

The listed below product likewise sets actually well with the product being gone over.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FUNCTIONS:
Ideal replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building

CONSISTS OF:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Teeth: 28
Pitch: 48

This product praises the above gone over product.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale car applications
Prewired with Traxxas high existing port

CONSISTS OF:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Connector

NEEDS:
Balancer and LiPo compatible battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Rated Capacity: 1300mAh
Release Score: 25C continuous
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER take apart or customize pack wiring in any way or leak cells
NEVER place on flammable materials or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm