Traxxas Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
place over the shock body and the piston heads that control the amount
of oil circulation in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on a lot of Traxxas nitro and electrical powered vehicles.
Two hole piston head for greater dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

This thing is regularly gotten with the above pointed out thing.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Safeguards the Chassis.

FEATURES:
Resilient Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Team RPM Decal

REQUIRES:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This thing praises the main item below.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel construction

CONSISTS OF:
6 steel shoulder screws

SPECS:
Length: 12mm
Size: 3mm

Here is an additional thing that praises the thing being talked about.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon construction

CONSISTS OF:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECS:
Size Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below thing additionally sets truly well with the thing being talked about.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and connectors

CONSISTS OF:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with connectors

REQUIRES:
Installing in automobile

SPECS:
Can Size: 1.25" (38mm)
Shaft Size: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

Here is an additional thing that praises the thing being talked about.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for models with a slipper clutch.
Black plastic construction

CONSISTS OF:
One spur equipment

SPECS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T equipment (TRAC4676),
    83T equipment (TRAC4683) and 90T equipment (TRAC4690).

Several others have gotten this thing together with the thing that you are currently reading about.

Rod Ends Long & Short

This set of rod ends, balls, and screws is utilized on all but 4 of Traxxas'
packages. It WILL NOT DEAL WITH: the Sledgehammer, initial Hawk, Feline, or Bullet.

Includes: 4 brief rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball connectors

pcd 01/23/94