Traxxas Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set consists of the spring retainers that hold the springs in
location over the shock body and the piston heads that control the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston moving towards higher dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to install parts.

This item is frequently purchased with the above stated item.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Car and Secures the Chassis.

FEATURES:
Long lasting Plastic Building
Black in Color

INCLUDES:
One Bumper
One Team RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This item praises the main item right here.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel building

INCLUDES:
6 steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Diameter: 3mm

Right here is an additional item that praises the item being reviewed.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock including the shock oil.

FEATURES:
Nylon building

INCLUDES:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

NEEDS:
Other shock elements

SPECIFICATIONS:
Diameter Tops Bottoms
16MM 13MM

REMARKS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The listed below item additionally pairs truly well with the item being reviewed.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Setting up in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not offered

Right here is an additional item that praises the item being reviewed.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Developed for designs with a slipper clutch.
Black plastic building

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Many others have purchased this item along with the item that you are presently checking out.

Rod Ends Long & Short

This set of rod ends, balls, and screws is utilized on all but 4 of Traxxas'
kits. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet.

Includes: 4 short rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball adapters

pcd 01/23/94