Traxxas Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
restaurant over the shock body and the piston heads that manage the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on many Traxxas nitro and electrical powered vehicles.
Two hole piston head for greater dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

This product is frequently bought with the above mentioned product.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Safeguards the Chassis.

FEATURES:
Long lasting Plastic Construction
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

REQUIRES:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This product praises the main item below.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FEATURES:
Black steel building and construction

INCLUDES:
6 steel shoulder screws

SPECIFICATIONS:
Length: 12mm
Diameter: 3mm

Right here is another product that praises the product being gone over.

Plastic Shock Caps & Bottoms

These are Shock Caps and Bottoms for Traxxas kits.
These seal the shock consisting of the shock oil.

FEATURES:
Nylon building and construction

INCLUDES:
2 nylon shock cap (tops)
2 nylon shock cap (bottoms)

REQUIRES:
Other shock elements

SPECIFICATIONS:
Diameter Tops Bottoms
16MM 13MM

COMMENTS:
These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

The below product likewise pairs actually well with the product being gone over.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with adapters

REQUIRES:
Installing in vehicle

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Including Shaft: 3.2" (81mm)
Length Not Including Shaft: 2.3" (57.5mm)
Specifications such as RPM are not provided

Right here is another product that praises the product being gone over.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Created for designs with a slipper clutch.
Black plastic building and construction

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

Numerous others have actually bought this product together with the product that you are presently reviewing.

Rod Ends Long & Short

This set of rod ends, balls, and screws is utilized on all however 4 of Traxxas'
packages. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Feline, or Bullet.

Includes: 4 brief rod ends (17mm)
16 long rod ends (19mm)
2 ball screws
18 hollow ball adapters

pcd 01/23/94