Traxxas Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas packages
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: Two notched rings

Get this thing to enhance the one you are reading about.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all of the TRAXXAS packages that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FUNCTIONS:
Made from RULON

INCLUDES:
Twelve pegs ***Colors might vary from photo***

SPECS:
length - 3.5mm
diameter - 3mm

REMARKS:
These pegs go in the holes on the side of the spur gear.

Lots of others have actually acquired this thing together with the thing that you are currently reviewing.

70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon building and construction
Drilled for light weight

Specs: Teeth-70
Pitch-32

Needs: Absolutely nothing, this is a direct replacement part.

Comments: This is the very same gear that can be found in the truck set.

2/10/97
AST

This thing is regularly acquired with the above discussed thing.

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design spur gear.

INCLUDES:
One 72 tooth spur gear

REQUIRES:
The other parts of that comprise the slipper clutch are:
    #1994 - tension spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - leading gear shaft to slipper adapter TRAC4185

SPECS:
Tooth: 72
Pitch: 32

You will enjoy this product if you have the product earlier discussed.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FUNCTIONS:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend building and construction, black in color
Locknuts used at the chassis and skid plate installing holes to
    firmly lock bulkheads in place, lowering the possibility of breakage

INCLUDES:
One each Left and Right Front Bulkhead
Eight M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

Right here is a fantastic thing that many others have actually bought at the very same time.

Slipper Tension Spring

This is the replacement slipper tension spring set for the Traxxas packages that
have slipper clutches (Rad 2, Hawk 2, TRX-1, Blue Eagles).

BUNDLE
INCLUDES:
Slipper tension spring (1)
Spur gear bushing (1) -- white
4mm Locknut with nylon insert (1)

This thing praises the main item here.

Slipper Pressure Plate (1)

This is a replacement parts set for the Traxxas Rad2, Hawk2, Nitro Hawk,
Nitro Street, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII.

This Package Includes:
(1) Slipper (or differential) pressure plate

JBN 1.25.94 *8)