Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, covered
Anodized black with white springs
Entirely put together

CONSISTS OF:
Four totally put together shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and putting together onto the design

The listed below product additionally sets actually well with the product being reviewed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)

This product compliments the main item right here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon building
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT recommend these for usage with brushless
systems

CONSISTS OF:
2 Rear Split Sixer Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will certainly like this product if you have the product above mentioned.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale car applications
Prewired with Traxxas high present adapter

CONSISTS OF:
7.4V 5000mAh 25C Difficult Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo compatible charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Ranked Capacity: 5000mAh
Release Rating: 25C continuous
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER dismantle or customize pack wiring in any method or leak cells
NEVER place on combustible materials or leave ignored during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The listed below product additionally sets actually well with the product being reviewed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Sturdy nylon strengthened plastic building
Uses all stock hardware (for mounting shocks and so on)

CONSISTS OF:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm