Traxxas Slash Big Bore Shocks

This is the optional Huge Bore Shock Set for the
2WD Traxxas Slash.
These replace the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum building, coated
Anodized black with white springs
Totally assembled

INCLUDES:
Four fully assembled shocks with white springs
Mounting hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

The below thing also pairs actually well with the thing being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Sturdy Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Also available in Blue (RPMC0705)

This thing compliments the main item below.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the back of the Traxxas Slash
front and back of the Traxxas Slash 4x4
fornt and back of the HPI Blitz
Nylon building
Red in color
Red bead-locs
*KEEP IN MIND* - Pro-Line does NOT recommend these for use with brushless
systems

INCLUDES:
2 Rear Split Sixer Wheels

REQUIRES:
Tires

SPECS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will love this thing if you have the thing above discussed.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale car applications
Prewired with Traxxas high existing connector

INCLUDES:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Rated Capacity: 5000mAh
Release Rating: 25C constant
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Adapter: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "DISCHARGE" lead
NEVER Trickle Charge
NEVER enable to Release below 2.5V per cell
NEVER dismantle or modify pack wiring in any way or leak cells
NEVER put on flammable products or leave unattended during
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g

The below thing also pairs actually well with the thing being discussed.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Durable nylon reinforced plastic building
Uses all stock hardware (for mounting shocks etc.)

INCLUDES:
One back shock tower

SPECS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Density: 7mm