Traxxas Slash Big Bore Shocks

This is the optional Big Bore Shock Set for the
2WD Traxxas Slash.
These change the plastic shocks that come stock with the kit.

FEATURES:
Strong aluminum construction, covered
Anodized black with white springs
Totally assembled

INCLUDES:
Four fully assembled shocks with white springs
Installing hardware
One bottle of silicone oil

REQUIRES:
Filling shocks with shock oil and assembling onto the design

The below product additionally sets really well with the product being talked about.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Strong Front/Rear A-Arms
for the Traxxas Slash 4x4.

FEATURES:
Black in color
Plastic constrution

INCLUDES:
Two Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Thickness: 0.31" (8mm)

COMMENTS:
Also offered in Blue (RPMC0705)

This product compliments the main item right here.



These are the Pro-Line Rear Split Sixer Red Bead-Loc On Black Wheels.

FEATURES:
Fits the rear of the Traxxas Slash
front and rear of the Traxxas Slash 4x4
fornt and rear of the HPI Blitz
Nylon construction
Red in color
Red bead-locs
*NOTE* - Pro-Line does NOT suggest these for usage with brushless
systems

INCLUDES:
Two Rear Split Sixer Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Outer Diameter: 2.2" (56mm)
Inner Diameter: 3.0" (76mm)
Width: 40.5mm (1.6")
Hex: 12mm

You will like this item if you have the item earlier mentioned.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/10 scale vehicle applications
Prewired with Traxxas high current port

INCLUDES:
7.4V 5000mAh 25C Tough Case LiPo Battery with Traxxas Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Rating: 7.4V
Rated Capability: 5000mAh
Discharge Rating: 25C constant
Dimensions: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Traxxas Plug
Balancing Connector: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER enable to Discharge below 2.5V per cell
NEVER dismantle or modify pack circuitry in any way or puncture cells
NEVER put on combustible materials or leave ignored during
    charging
ALWAYS Charge in a fire-resistant location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY keep out of reach of kids
All weights include wire leads and plugs
All weights +/- 1 g

The below product additionally sets really well with the product being talked about.

Rear Shock Tower, For Traxxas Slash/Rustler/Stampede/Bandit

This is the RPM Rear Shock Tower for the
Traxxas E-Stampede, E-Rustler and E-Bandit.

FEATURES:
Strong nylon enhanced plastic construction
Uses all stock hardware (for mounting shocks etc.)

INCLUDES:
One rear shock tower

SPECIFICATIONS:
Width: 4.33" (110mm)
Height: 2.75" (70mm)
Thickness: 7mm