Traxxas Skidplates, Front & Rear (Slas

This is the Front and Back Skidplate for the Traxxas Slash.
This skidplate bolts to the Chassis and the Bulkheads TRAC5530
and offers protection to the front differential.

FEATURES:
Skidplate is constructed of high impact molded black plastic
Front of skidplate kicks up at about 40 degrees to shield the
    differential from crash damage or difficult landings from jumps

CONSISTS OF:
One front skidplate
One rear skidplate

NEEDS:
Setting up on chassis

Want an additional great product to compliment the above pointed out product?

Chassis, Slash

This is the Gray Nylon Chassis for the 2WD Traxxas Slash.

FEATURES:
Gray composite nylon building

CONSISTS OF:
One chassis for the Traxxas Slash

NEEDS:
Setting up all parts onto the chassis

SPECIFICATIONS:
Length: 338mm (13.3")
Width: 189mm (7.44")
Height: 23mm (0.91")
Thickness: 0.08" (2mm)

The listed below product likewise pairs really well with the product being gone over.

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FEATURES:
Composite nylon building
Replaces a worn or broken bellcrank set
May also be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    designs (assembled in various setups depending upon model)

CONSISTS OF:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Maker Screws
Two Hollow Balls
4 Bushings
Instruction Sheet

NEEDS:
Assembly and installation following the model manual and included
guideline sheet

This product compliments the above gone over product.

Aluminum Caster Blocks, Red, For Traxxas Slash / Stampede / Rust

You will certainly like this product if you have the product previously stated.



This is the ST Racing Red Aluminum Back Hub Provider
for the Traxxas Slash, Stampede, Rustler and Bandit.

FEATURES:
Red in color

CONSISTS OF:
Two Red Aluminum Back Hub Carriers