Traxxas Skidplate Front

This is the Front Skidplate for the Traxxas T-Maxx Beast Truck.
This skidplate bolts to the Chassis (vital #4922) and the Bulkheads vital #4930
and offers security to the front differential.

FEATURES:
Skidplate is constructed of high effect formed black plastic.
Front of skidplate kicks up at about 45 degrees to protect the
    differential from crash damage or difficult landings from jumps.
Stainless steel mounting plate offers rigid mounting surface.

INCLUDES:
One plastic front skidplate
One stainless steel mounting plate.

REQUIRES:
Setting up on chassis with four 3x10mm countersunk maker screws
    (not included, use TRAC3277).

The below thing also pairs actually well with the thing being discussed.

Bulkheads (L/R) (Fr) Grey

This is the Left and Right Front Bulkheads for the T-Maxx 3.3.

FEATURES:
Fastens to front skidplate and holds front diff in location
Gray in color, constructed of solidified plastic

CONSISTS OF:
Left and Right Front Bulkheads for the T-Maxx 3.3

NEEDS:
Securing to skidplate and differential

COMMENTS:
For the 3.3 variation just.

This thing is often gotten with the above mentioned thing.

Skidplate Rear

This is the Replacement Rear Skidplate for the Traxxas T-Maxx
4WD Radio Control Beast Truck.
This rear skidplate bolts underneath the chassis and helps to
prevent the chassis from getting scratched.

FEATURES:
Replaces broken back skidplates.
Constructed of black plastic.

INCLUDES:
One rear skidplate.

REQUIRES:
Bolting to bottom of chassis using 3 3x10mm countersunk maker
    screws (not included).

COMMENTS:
Maker's site is www.traxxas.com

This thing is often gotten with the above mentioned thing.

3 X 15Mm Counter Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Countersunk Hex Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo monster truck, can likewise be used in any
    application where a 3x15mm countersunk screw is needed

CONSISTS OF:
6 3x15mm Traxxas Countersunk Hex Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

This thing is often gotten with the above mentioned thing.

Susp Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
Two 59mm screw pins.
Four 73mm screw pins.
Two 65mm screw pins.

REQUIRES:
T-Maxx 3.3

Right here is a great thing that lots of others have actually purchased the very same time.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Blue

These are the RPM Front Bulkheads in Blue
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all variations of the T-Maxx and E-Maxx
Nylon mix construction, blue in color
Locknuts used at the chassis and skid plate mounting holes to
    securely lock bulkheads in location, minimizing the opportunity of damage

CONSISTS OF:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws

This is a wonderful addition to the thing presently being discussed.

Suspension Pin Set E/T Maxx

These are the replacement hinge pin screws for the Traxxas T/E-Maxx
    The hinge pins hold the suspension arms to the bulkheads

FEATURES:
Resilient steel construction

CONSISTS OF:
8 pins

NEEDS:
Assembly onto T/E-Maxx

SPECS:
Length: 65.3mm (2.57")
Diameter: 3.2mm (.13")

COMMENTS:
These suffice hinge pins for the whole vehicle.