Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is included in a number of the
Traxxas kits. It is roughly 30 weight oil (Traxxas does not list exact
weight), can be found in a 1/2 oz (roughly) bottle and is clear.

Silicone damper (shock) oil is better than petroleum shock oil due to the fact that
silicone oil is not impacted by temperature.

PACKAGE
CONSISTS OF: One roughly 1/2 ounce bottle.

Regularly acquired with the product that you are currently reviewing.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, also work well
with Associated aluminum shocks. Qty-4

The listed below product also sets really well with the product being discussed.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want an additional excellent product to enhance the above stated product?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set contains the spring retainers that hold the springs in
place over the shock body and the piston heads that manage the quantity
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on most Traxxas nitro and electrical powered vehicles.
Two hole piston head for higher dampening or three hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    Two upper and two lower spring retainers
    Two 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to set up parts.

Here is an additional product that compliments the product being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
Two Front/Rear A-Arms

REQUIRES:
Installation at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at best point
Density: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

Here is an additional product that compliments the product being discussed.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Back Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
Two Back Bearing Carriers
Decal

REQUIRES:
Two 5x11x4mm ball bearings, DTXC1547

This product is regularly acquired with the above stated product.