Traxxas Silicone Damper Oil

This is the replacement silicone damper oil that is included in a number of the
Traxxas sets. It is around 30 weight oil (Traxxas does not list precise
weight), is available in a 1/2 oz (around) bottle and is clear.

Silicone damper (shock) oil is much better than petroleum shock oil since
silicone oil is not impacted by temperature.

PACKAGE
CONSISTS OF: One around 1/2 ounce bottle.

Often gotten with the item that you are presently reading about.

Rubber Diaphragms (4)

These rubber cap diaphragms for Traxxas plastic shocks, likewise work well
with Associated aluminum shocks. Qty-4

The listed below item additionally sets actually well with the item being discussed.

Shock Rebuild Big Bore/Ultra

This is a shock rebuild package for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

Want an additional fantastic item to match the above mentioned item?

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that manage the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for 2 shocks.
Fits the shocks on a lot of Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or 3 hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and 2 lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

REQUIRES:
Disassembly of shock to install parts.

Right here is an additional item that compliments the item being discussed.

Front Or Rear A-Arms For Traxxas Slash 4X4 And Rustler 4X4, Blac

These are the optional RPM Heavy Duty Front/Rear A-Arms
for the Traxxas Slash 4x4.

FUNCTIONS:
Black in color
Plastic constrution

CONSISTS OF:
2 Front/Rear A-Arms

REQUIRES:
Setup at front or rear suspension

SPECIFICATIONS:
Length: 3.96" (100.5mm)
Width: 1.79" (45.5mm) at largest point
Density: 0.31" (8mm)

COMMENTS:
Likewise readily available in Blue (RPMC0705)

Right here is an additional item that compliments the item being discussed.

Rear Bearing Carrier For Traxxas Slash 4X4 Or Rustler 4X4, Black

These are optional Back Bearing Carriers for the Traxxas Slash 4x4, Nitro
Rustler, Nitro Stampede, Nitro Sport, Rad2, Hawk 2 and Eagle/Eagle LSII.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
2 Back Bearing Carriers
Decal

REQUIRES:
2 5x11x4mm ball bearings, DTXC1547

This item is regularly gotten with the above mentioned item.