Traxxas Shrt Rod Ends/Ball Cnnctr (6)

This are Rod Ends Short for the Nitro T-Maxx.
These rods ends attach to turnbuckles for front/rear.

FEATURES:
Black nylon rod ends
Steel pivot balls

SUCHES AS:
6 nylon rod ends
6 pivot balls

NEEDS:
Turnbuckles: TRAC6338

SPECIFICATIONS:
Length: .695" (17.6mm)
Inner Diameter: .217" (5.5mm)

COMMENTS:
Will work only for the Nitro T-Maxx.

This is a great addition to the product presently being gone over.

3 X 15Mm Button Hex Screw (6)

This is a plan of six 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo beast truck, can likewise be utilized in any
    application where a 3x15mm button head screw is required

SUCHES AS:
6 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECIFICATIONS:
Length: 15mm
Diameter: 3mm

Numerous others have actually bought this product in addition to the product that you are presently reviewing.

Antenna Tube W/ Cap, Black

This is a conventional replacement Antenna Tube with Cap from Dubro
This product can be utilized anywhere an antenna tube is required to support
a receiver antenna wire.

FEATURES:
Black plastic construction

SUCHES AS:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Absolutely nothing. This is a direct fit part for any boat, vehicle, etc. that utilizes
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

You will certainly love this thing if you have the thing just above stated.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on automobile

Here is a wonderful product that numerous others have actually bought at the same time.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FEATURES:
Fiberglass Building

SUCHES AS:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECIFICATIONS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

COMMENTS:
None

Want another wonderful product to enhance the above pointed out product?

Rod Ends/Ball Connector (6)

These are 5.8mm ball ends and balls utilize in the LS II race truck kit.

Kit suches as: 6ea 5.8mm metal balls
6ea 5.8mm white nylon ball ends

pcd 01/10/94

The listed below product also pairs really well with the product being gone over.

Shock Rebuild Big Bore/Ultra

This is a shock reconstruct kit for 2 Traxxas black plastic shocks. Consists of:

4 E-clips
2 C-clips
2 O-rings
8 Washers
2 Diaphrams

This product is regularly bought with the above pointed out product.

Shock Shafts Chrome Xxl (2)

This is a set of XXL shock shafts for the Traxxas shocks.

Includes: 2 shock shafts

Functions: solidified chrome/steel construction

Specifications: 2 1/8" long or 54mm
1/16" diameter or 1.5mm

Needs: Extra long shocks

Remarks: These are threaded on one end, and have the slots for e-clips on the
other.

4/16/97
AST

This is a great addition to the product presently being gone over.

Spring Retainers

These are the Traxxas Spring Retainers for Traxxas Shocks.
This set includes the spring retainers that hold the springs in
location over the shock body and the piston heads that control the amount
of oil flow in the shock cylinder.

FEATURES:
Constructed of molded plastic.
Contains enough parts for two shocks.
Fits the shocks on many Traxxas nitro and electric powered vehicles.
Two hole piston moving towards higher dampening or two hole piston head
    for softer spring performance.

INCLUDES:
One Traxxas Spring Retainer Set with:
    2 upper and two lower spring retainers
    2 2 hole piston head covers
    Two 3 hole piston head covers

NEEDS:
Disassembly of shock to set up parts.